表紙画像

Sintering behaviour of slip-cast Al2O3 - Y-TZP composites

The sintering behaviour of alumina-Y-TZP composites prepared by slip-casting technique were studied. Slip-cast samples containing varying amounts of Y-TZP ranging up to 90 vol% were prepared and evaluated. Sintering studies were carried out at 1450 �C to 1600 �C. Sintered samples were characterized...

保存先:

書誌詳細
主要な著者:	Ramesh S., Siah L.F., Nor Azmah A.K.
その他の著者:	41061958200
フォーマット:	論文
出版事項:	Kluwer Academic Publishers 2023
主題:	Alumina Grain size and shape Hardness Sintering Slip-casting techniques Metallic matrix composites
タグ:	タグ追加タグなし, このレコードへの初めてのタグを付けませんか!

類似資料

Synthesis and mechanical properties of alumina slip casting from aluminum tri-hydrate (Al(OH)₃
著者:: Nurfarahin, Mohd. Nordin
出版事項: (2017)

Solidification characteristic of Metal Matrix composite produced by sand casting
著者:: N., Fatchurrohman, 等
出版事項: (2010)

Fabrication and characterization of microwave sintered PM Fe-Cr-Y2O3 composite
著者:: Marina, Marzuki
出版事項: (2016)

Comparison of liquid phase sintering and Cu-melt infiltration methods to consolidate 80W-Cu composite using nickel as sintering activator
著者:: Hafed, Ibrahim, 等
出版事項: (2014)

Hybrid microwave sintering of Fe-Cr-Cu
著者:: Siti Syafiqah, Sakor
出版事項: (2021)

Effect of microwave sintering on the properties of copper oxide doped alumina toughened zirconia (ATZ)
著者:: Abbas M.K.G., 等
出版事項: (2024)

A state-of-the-art review on alumina toughened zirconia ceramic composites
著者:: Abbas M.K.G., 等
出版事項: (2024)

Influence of sintering temperature on density, hardness, shrinkage and microstructure of Alumina-Zirconia cutting tool
著者:: A. A. Anis, 等
出版事項: (2022)

Effects of Grain Refinement on The Cooling Rate, and Microstructural and Mechanical Properties of Al-Si Sand Castings
著者:: Lim, Ying Pio
出版事項: (2006)

Mechanical and electrical properties of Y-TZP/ZrB2 composite
著者:: Amiriyan M., 等
出版事項: (2023)

Effect of sintering additives on the properties of alumina toughened zirconia (ATZ)
著者:: Abbas M.K.G., 等
出版事項: (2024)

Enhancing the mechanical performance of Alumina - Zirconia Bioceramics composites via microwave processing
著者:: Muhammad Taimiyah, Md Som
出版事項: (2021)

The role of the activator rich-W interboundary layer on liquid phase sintering of W-pre-alloy bronze composites of Fe and Co additions
著者:: Kahtan S, Muhammed, Dr., 等
出版事項: (2013)

Mechanical properties of microwave sintered 60YSZAl₂0₃/10HAP bioceramics composites
著者:: Nurliyana, Mohd Rosli, 等
出版事項: (2016)

Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles
著者:: Wan Abdul Rahman Assyahid, Wan Ibrahim, 等
出版事項: (2014)

Influence of binder in iron matrix composites
著者:: S., Shamsuddin, 等
出版事項: (2010)

The factors affecting the swelling of W–bronze composite system at different sintering conditions
著者:: Kahtan S, Muhammed, Dr., 等
出版事項: (2014)

Microwave sintering of pure iron with addition of stearic acid as binder
著者:: Wan Abdul Rahman Assyahid, Wan Ibrahim, 等
出版事項: (2014)

Sintering behavior and microstructure evolution of mechanically alloyed W–bronze composite powders by two-step ball milling process
著者:: Kahtan S., Muhammed, Dr., 等
出版事項: (2014)

The evolutions of microstructure in pressureless Sintered Silver die attach material
著者:: S.R., Esa, 等
出版事項: (2021)

Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering
著者:: Shamsul, Baharin Jamaludin, Prof. Dr., 等
出版事項: (2014)

Corrosion behaviour on powder metallurgy aluminium matrix composite reinforced with alumina Saffil™ short fibres
著者:: Normah, Cheman
出版事項: (2010)

Characterization of Manganese Doped Y-TZP for Biomedical applications
著者:: S., Meenaloshini, 等
出版事項: (2016)

The influence of variation milling time into mechanical properties for 5% SiC reinforced P/M 5082 develop by using Powder Metallurgy technique
著者:: Ade, Firdianto, 等
出版事項: (2010)

Effects of bismuth oxide on the sinterability of hydroxyapatite
著者:: Ramesh S., 等
出版事項: (2023)

Synthesis and characterization of stabilized zirconia toughened alumina (ZTA) doped niobium pentoxide (Nb₂O₅)
著者:: Zaimi, Zul@Azhar
出版事項: (2017)

AMCSKUK®: Aluminium Matrix Composite from AL SCRAP and Short Fibre-Alumina
出版事項: (2008)

The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy
著者:: Khairel Rafezi Ahmad, 等
出版事項: (2008)

Hybrid microwave sintering of Fe-Cr-SiC
著者:: Khairul Nisak, Kamis
出版事項: (2021)

Diffusion mechanism of silver particles in polymer binder for die attach interconnect technology
著者:: Siti Rahmah, Esa, 等
出版事項: (2020)

Effect of sintering parameter on the densification and mechanical properties of microwave sintered copper
著者:: Mohd Nasruddin, Mohamad Ghazali
出版事項: (2016)

The application of Fluidity Spiral in sand-mold casting
著者:: Mohd Ichwan, Nasution, 等
出版事項: (2009)

Foreign reserves slip to RM399.6b in November
著者:: Rupa, Damodaran
出版事項: (2017)

Role of carbon nanotubes in polycarbonate composites for modification in hardness
著者:: Jindal, Prashant, 等
出版事項: (2016)

Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
著者:: Durairaj Ehambron
出版事項: (2008)

Optimization of holding time on microwave irradiation of the composite iron-chromium reinforced with alumina particle
著者:: Wan Abdul Rahman Assyahid, Wan Ibrahim, 等
出版事項: (2019)

Phase stability and microstructural development of Y-TZP-doped hydroxyapatite
著者:: Ramesh S., 等
出版事項: (2023)

Production of Al/Al2O3p Metal Matrix Composites (MMC) by Semisolid metal processing method
著者:: H., Budiman, 等
出版事項: (2010)

Preliminary Microstructure and Hardness Studies of A356/Stainless Steel Composite via Gravity Die Casting Technique
著者:: Mazlee Mohd Noor, 等
出版事項: (2008)

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
著者:: Khairul Khusairi Kamaludin
出版事項: (2009)