Communication system for controlling smart appliances using power line communication
Microcontroller-based master and slave units are designed with serial ports for communication with a computer and a transmission port to couple the signal to modems at both ends. The programming of the microcontrollers at either end for formatting the data bits before they are sent down the power li...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Other Authors: | |
| Format: | Conference Paper |
| Published: |
Institute of Electrical and Electronics Engineers Inc.
2023
|
| Subjects: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my.uniten.dspace-29737 |
|---|---|
| record_format |
dspace |
| spelling |
my.uniten.dspace-297372024-04-18T10:48:50Z Communication system for controlling smart appliances using power line communication Khan S. Islam R. Khalifa O.O. Omar J. Hassan A. Adam I. 7404043105 55353037200 9942198800 24463418200 24823900300 22633600000 Codes (symbols) Microcontrollers Frequency contents Frequency performance High-power systems Interfacing circuits Microcontroller-based Power line communications Very high frequency Very low frequency Reconfigurable hardware Microcontroller-based master and slave units are designed with serial ports for communication with a computer and a transmission port to couple the signal to modems at both ends. The programming of the microcontrollers at either end for formatting the data bits before they are sent down the power line and the development of software for putting in place the required master and slave protocols is presented. Coupling data signals to power line through interfacing circuits is a challenging task as power line and the communication system operate at two extremes - very low frequency and high power for the power line while communication is working at very high frequency and very low voltage and current levels. Hence, the coupling circuit to be designed must be capable to withstand the high power system side in order to prevent a damage being done to the electronic side of the communication system. At the same time it must be reliable enough to make sure that data bits are transferred on to the power line with high accuracy. The interfacing circuits are designed and tuned to frequency contents making the bits of data. The frequency performance of these coupling circuits is presented, showing the range a power line can be used for communication of such data. � 2006 IEEE. Final 2023-12-28T08:08:39Z 2023-12-28T08:08:39Z 2006 Conference Paper 10.1109/ICTTA.2006.1684818 2-s2.0-84878405117 https://www.scopus.com/inward/record.uri?eid=2-s2.0-84878405117&doi=10.1109%2fICTTA.2006.1684818&partnerID=40&md5=82bee4d6ea9d0928b304ada60aab7eda https://irepository.uniten.edu.my/handle/123456789/29737 2 1684818 2595 2600 Institute of Electrical and Electronics Engineers Inc. Scopus |
| institution |
Universiti Tenaga Nasional |
| building |
UNITEN Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Tenaga Nasional |
| content_source |
UNITEN Institutional Repository |
| url_provider |
http://dspace.uniten.edu.my/ |
| topic |
Codes (symbols) Microcontrollers Frequency contents Frequency performance High-power systems Interfacing circuits Microcontroller-based Power line communications Very high frequency Very low frequency Reconfigurable hardware |
| spellingShingle |
Codes (symbols) Microcontrollers Frequency contents Frequency performance High-power systems Interfacing circuits Microcontroller-based Power line communications Very high frequency Very low frequency Reconfigurable hardware Khan S. Islam R. Khalifa O.O. Omar J. Hassan A. Adam I. Communication system for controlling smart appliances using power line communication |
| description |
Microcontroller-based master and slave units are designed with serial ports for communication with a computer and a transmission port to couple the signal to modems at both ends. The programming of the microcontrollers at either end for formatting the data bits before they are sent down the power line and the development of software for putting in place the required master and slave protocols is presented. Coupling data signals to power line through interfacing circuits is a challenging task as power line and the communication system operate at two extremes - very low frequency and high power for the power line while communication is working at very high frequency and very low voltage and current levels. Hence, the coupling circuit to be designed must be capable to withstand the high power system side in order to prevent a damage being done to the electronic side of the communication system. At the same time it must be reliable enough to make sure that data bits are transferred on to the power line with high accuracy. The interfacing circuits are designed and tuned to frequency contents making the bits of data. The frequency performance of these coupling circuits is presented, showing the range a power line can be used for communication of such data. � 2006 IEEE. |
| author2 |
7404043105 |
| author_facet |
7404043105 Khan S. Islam R. Khalifa O.O. Omar J. Hassan A. Adam I. |
| format |
Conference Paper |
| author |
Khan S. Islam R. Khalifa O.O. Omar J. Hassan A. Adam I. |
| author_sort |
Khan S. |
| title |
Communication system for controlling smart appliances using power line communication |
| title_short |
Communication system for controlling smart appliances using power line communication |
| title_full |
Communication system for controlling smart appliances using power line communication |
| title_fullStr |
Communication system for controlling smart appliances using power line communication |
| title_full_unstemmed |
Communication system for controlling smart appliances using power line communication |
| title_sort |
communication system for controlling smart appliances using power line communication |
| publisher |
Institute of Electrical and Electronics Engineers Inc. |
| publishDate |
2023 |
| _version_ |
1806425805610287104 |
| score |
13.222552 |