Effects of bismuth oxide on the sinterability of hydroxyapatite
The sinterability of Bi2O3-doped hydroxyapatite (HA) has been studied and compared with the undoped HA. Varying amounts of Bi 2O3 ranging from 0.05 wt% to 1.0 wt% were mixed with the HA. The study revealed that most sintered samples composed of the HA phase except for compacts containing 0.3, 0.5 an...
保存先:
| 主要な著者: | , , , , , , |
|---|---|
| その他の著者: | |
| フォーマット: | 論文 |
| 出版事項: |
2023
|
| 主題: | |
| タグ: |
タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
|
| 要約: | The sinterability of Bi2O3-doped hydroxyapatite (HA) has been studied and compared with the undoped HA. Varying amounts of Bi 2O3 ranging from 0.05 wt% to 1.0 wt% were mixed with the HA. The study revealed that most sintered samples composed of the HA phase except for compacts containing 0.3, 0.5 and 1.0 wt% Bi2O3 and when sintered above 1100 �C, 1000 �C and 950 �C, respectively. In general, the addition of 0.5 wt% Bi2O3 was identified as the optimum amount to promote densification as well as to improve the mechanical properties of sintered HA at low temperature of 1000 �C. Throughout the sintering regime, the highest value of relative bulk density of 98.7% was obtained for 0.5 wt% Bi2O3-doped HA when sintered at 1000 �C. A maximum Young's modulus of 119.2 GPa was measured for 0.1 wt% Bi2O3-doped HA when sintered at 1150 �C. Additionally, the ceramic was able to achieve highest hardness of 6.08 GPa and fracture toughness of 1.21 MPa m1/2 at sintering temperature of 1000 �C. � 2010 Elsevier Ltd and Techna Group S.r.l. |
|---|