封面图片

A comparative bibilometric analysis of Taguchi-centered optimization in plastic injection moulding

Plastic injection molding is one of the most common methods of part manufacturing. Different optimization techniques are commonly used in this industry to satisfy for the multi-input multi-output (MIMO) characteristics of the injection process. The primary objective of this study is to provide a com...

Saved in:

书目详细资料
Main Authors:	Bariran S.E.S., Sahari K.S.M.
其他作者:	56347810600
格式:	Conference Paper
出版:	Penerbit UTM Press 2023
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
由: Mehat, Nik Mizamzul
出版: (2010)

The use of Taguchi method in the design of plastic injection mould for reducing warpage
由: Tang, Sai Hong, et al.
出版: (2007)

An Integration Of Taguchi Method And Grey Relational Analysis In Optimizing Injection Moulding Processing Parameter Of Recycled Plastic
由: Zakarria, Noor Syuhadah
出版: (2014)

Design and analysis mould for plastic injection moulding
由: Fadzli, Idris
出版: (2014)

Taguchi method used in optimization of plastic injection molding
由: Kamarudin, N. F., et al.
出版: (2019)

Optimization of injection moulding parameters in reducing cavity pressure using Taguchi method
由: Md Ali, Mohd Amran, et al.
出版: (2023)

Design and Analysis of Plastic Injection Mould for Holder Casing
由: Wong, Choon Tat
出版: (2004)

Design and Simulation of Plastic Injection Moulding Process
由: Wong, Choon Tat, et al.
出版: (2004)

Effect Of Injection Moulding Parameters On The Shrinkage Using Taguchi Method
由: Wan Azhari, Wan Noor Azrina
出版: (2016)

Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis
由: Mohd Ali, Noorfa Idayu
出版: (2018)

Investigation on the effects of processing parameters on shrinkage behaviour and tensile properties of injection moulded plastic gear via the Taguchi method
由: Mehat, N.M., et al.
出版: (2017)

Simulation of plastic injection moulding of family mould using moldflow and design of experiment
由: Mohd. Badri , Mohd. Najib
出版: (2010)

Plastic flow analysis of hand drill casing using injection moulding
由: Muhammad Azim, Rosli
出版: (2022)

Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen
由: Mohd Ariffin, Mohd Khairol Anuar
出版: (2001)

Optimisation of pipe fitting in the injection moulding process using the Taguchi method
由: Mohamad Fitri, Mohamad Sani
出版: (2022)

Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function
由: Vivekanandan, Panneerselvam, et al.
出版: (2021)

Optimisation of injection moulding process parameters using taguchi and desirability function
由: Vivekanandan, Panneerselvam
出版: (2020)

Effect of injection moulding process parameters on plastic part quality in transparent glass mould
由: Mohd Amran, Md Ali, et al.
出版: (2014)

Optimization Of Injection Moulding Process For Hdpe Moulded Gear
由: Kassim, Mohd Syahir Mohd
出版: (2015)

Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part
由: Md Ali, Mohd Amran, et al.
出版: (2012)

An Integration Of Taguchi Method And Response Surface Methodology (Rsm) On Injection Moulded Pp Gears For Parameters Optimization
由: Jamaludin, Amirul Aliff
出版: (2015)

Biological durability of injection moulded wood plastic composite boards
由: H'ng, Paik San, et al.
出版: (2011)

Mini plastic injection moulding / Muhammad Arsyad Nashrol Azam
由: Muhammad Arsyad, Nashrol Azam
出版: (2022)

Taguchi method for optimising the sintering parameter of the Metal Injection Moulding (MIM) compacts
由: Jamaludin, Khairur Rijal, et al.
出版: (2009)

Investigation of mould design and process parameter optimisation of plastic injection moulding for thin wall part
由: Hussin, Azmee
出版: (2019)

Analysis of optimal injection moulding process parameters for thin-shell plastic product using response surface methodology
由: Awang Bono, et al.
出版: (2014)

OPTIMIZATION OF MULTI FACTORS FOR INJECTION-MOULDED MICRO GEAR VIA NUMERICAL SIMULATION INTEGRATED WITH THE TAGUCHI METHOD AND PRINCIPAL COMPONENT ANALYSIS
由: Mehat, N.M., et al.
出版: (2020)

Optimization of multiple quality characteristics for injection moulded polyamide helical gear via integration of Taguchi method and Grey relational analysis
由: Mehat, N.M., et al.
出版: (2020)

OPTIMIZATION OF MULTI FACTORS FOR INJECTION-MOULDED MICRO GEAR VIA NUMERICAL SIMULATION INTEGRATED WITH THE TAGUCHI METHOD AND PRINCIPAL COMPONENT ANALYSIS
由: Mehat, N.M., et al.
出版: (2020)

Feasibility Study Of Reprocessed Acrylonitrile Butadiene Styrene (ABS) And Optimization Of Injection Moulding Parameters Via Taguchi Method
由: Ng, Chin Fei
出版: (2011)

Investigation on wear behavior of bamboo filler reinforcement of injection moulded plastic gear
由: Mehat, N.M., et al.
出版: (2017)

Optimization Of Injection Molding Parameters Fo Production Of Polypropylene Plastic Tray Using Taguchi Method
由: Wan, Kok Seong
出版: (2005)

Injection Moulding Processing Analysis of Polylactic Acid And Low-Density Polyethylene Plastic Spoon
由: Wong, Qin Yan
出版: (2012)

Plastic injection moulding sector in Selangor : a strategic analysis / Tan Joo Him
由: Tan, Joo Him
出版: (1998)

Multi Response Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function
由: Vivekanandan, Panneerselvam, et al.
出版: (2020)

Properties of wood plastic composite produced using injection moulding process
由: Hang, Chit Meng
出版: (2010)

Simulation of plastic injection moulding part using moldflow and design of experiment
由: Halim , Shamsul Azwan
出版: (2010)

The effect of pressure on warpage of dumbbell plastic part in injection moulding machine
由: Md Ali, Mohd Amran, et al.
出版: (2014)

The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine
由: Md Ali, Mohd Amran, et al.
出版: (2014)

Fibre insert mould for injection moulding
由: Norjamalullail Tamri,, et al.
出版: (2020)