Evaluation of mechanichal properties of 3D micro - composite material
This project is regarding 3D woven material that has been enhanced with natural fillers. Main objectives for this project are to fabricate the 3D composite material, Evaluate the mechanical properties and characterize the properties of 3D composite material. Nowadays, 2D composite material’s technol...
Saved in:
| Main Author: | |
|---|---|
| Format: | |
| Published: |
2023
|
| Subjects: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my.uniten.dspace-21592 |
|---|---|
| record_format |
dspace |
| spelling |
my.uniten.dspace-215922023-05-04T19:23:00Z Evaluation of mechanichal properties of 3D micro - composite material Muhammad Faiz Fikri Bin Ismail 3D composite material Resin Hardener Fillers This project is regarding 3D woven material that has been enhanced with natural fillers. Main objectives for this project are to fabricate the 3D composite material, Evaluate the mechanical properties and characterize the properties of 3D composite material. Nowadays, 2D composite material’s technology is widely use in the industry. The problems that we encounter are 2D material’s fibers quantity is lower in vertical direction. Thus, it causes unfavourable of mechanical performance due to low impact damage resistance. In addition, fabrication of 2D material is time consuming and high in cost. For my project scope, there will be reviewing some researches and literature review for the past experiments, lab testing and standardization. Next, market price for material purchasing is surveyed. Other than that, 3D woven material will be fabricated, and 3 lab testing will be done. The results from the tests will be analysed and concluded. In order to achieve the objective, data is collected, and mechanical testing is done. Mechanical testing that will be used in this project are compression test, Charpy impact test and three-point bending test. The results are analysed and discussed in the thesis. The conclusions are made, and we can figure out whether adding the natural fillers to 3D woven material is good or not for its mechanical properties. 2023-05-03T17:21:50Z 2023-05-03T17:21:50Z 2020-02 https://irepository.uniten.edu.my/handle/123456789/21592 application/pdf |
| institution |
Universiti Tenaga Nasional |
| building |
UNITEN Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Tenaga Nasional |
| content_source |
UNITEN Institutional Repository |
| url_provider |
http://dspace.uniten.edu.my/ |
| topic |
3D composite material Resin Hardener Fillers |
| spellingShingle |
3D composite material Resin Hardener Fillers Muhammad Faiz Fikri Bin Ismail Evaluation of mechanichal properties of 3D micro - composite material |
| description |
This project is regarding 3D woven material that has been enhanced with natural fillers. Main objectives for this project are to fabricate the 3D composite material, Evaluate the mechanical properties and characterize the properties of 3D composite material. Nowadays, 2D composite material’s technology is widely use in the industry. The problems that we encounter are 2D material’s fibers quantity is lower in vertical direction. Thus, it causes unfavourable of mechanical performance due to low impact damage resistance. In addition, fabrication of 2D material is time consuming and high in cost. For my project scope, there will be reviewing some researches and literature review for the past experiments, lab testing and standardization. Next, market price for material purchasing is surveyed. Other than that, 3D woven material will be fabricated, and 3 lab testing will be done. The results from the tests will be analysed and concluded. In order to achieve the objective, data is collected, and mechanical testing is done. Mechanical testing that will be used in this project are compression test, Charpy impact test and three-point bending test. The results are analysed and discussed in the thesis. The conclusions are made, and we can figure out whether adding the natural fillers to 3D woven material is good or not for its mechanical properties. |
| format |
|
| author |
Muhammad Faiz Fikri Bin Ismail |
| author_facet |
Muhammad Faiz Fikri Bin Ismail |
| author_sort |
Muhammad Faiz Fikri Bin Ismail |
| title |
Evaluation of mechanichal properties of 3D micro - composite material |
| title_short |
Evaluation of mechanichal properties of 3D micro - composite material |
| title_full |
Evaluation of mechanichal properties of 3D micro - composite material |
| title_fullStr |
Evaluation of mechanichal properties of 3D micro - composite material |
| title_full_unstemmed |
Evaluation of mechanichal properties of 3D micro - composite material |
| title_sort |
evaluation of mechanichal properties of 3d micro - composite material |
| publishDate |
2023 |
| _version_ |
1806426021631623168 |
| score |
13.222552 |