Evaluating the effects of recycled concrete aggregate size and concentration on properties of high-strength sustainable concrete
This paper studies the fresh and mechanical properties of high-strength concrete (HSC) by incorporating recycled concrete aggregates (RCA) of varying sizes and concentrations. The recycled aggregate concrete (RAC) was prepared by partially replacing RCA with natural coarse aggregate (NCA) at 0%, 15%...
保存先:
| 主要な著者: | , , , , , , , , |
|---|---|
| フォーマット: | 論文 |
| 言語: | English |
| 出版事項: |
King Saud University
2022
|
| 主題: | |
| オンライン･アクセス: | http://ir.unimas.my/id/eprint/38837/1/Evaluating%20the%20effect%20-%20Copy.pdf http://ir.unimas.my/id/eprint/38837/ https://www.sciencedirect.com/science/article/pii/S1018363922000356 https://doi.org/10.1016/j.jksues.2022.04.004 |
| タグ: |
タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
|
| 要約: | This paper studies the fresh and mechanical properties of high-strength concrete (HSC) by incorporating recycled concrete aggregates (RCA) of varying sizes and concentrations. The recycled aggregate concrete (RAC) was prepared by partially replacing RCA with natural coarse aggregate (NCA) at 0%, 15%, 30%, and 45%, with aggregate sizes ranging from 5 to 12 and 12–20-mm. Fresh concrete properties, such as slump, Kelly ball, compacting factor, K-slump, and fresh density, were tested to determine the influence of RCA size and concentration. In addition, the mechanical properties were studied through the execution of compressive, split-tensile, and stress-strain tests. The test results revealed that increasing the RCA concentration declines the fresh and hardened properties of HSC. In the fresh concrete experimentation, the 12–20 mm aggregate size RAC mixes exhibited greater workability than the 5–12 mm aggregate mixes. On the contrary, 5–12 mm aggregate mixes RAC had higher compressive and split-tensile strength and a higher modulus of elasticity than 12–20 mm aggregate mixes concrete. When it comes to sustainability, the study found that the smaller size range of RAC produces inferior embodied CO2 (eCO2) and provides a cost-effective and sustainable solution for the construction industry. |
|---|