封面圖片

Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis

Access is limited to UniMAP community.

Saved in:

書目詳細資料
主要作者:	Ng, Soo Li
其他作者:	Yusrina, Mat Daud
格式:	Other
語言:	English
出版:	Universiti Malaysia Perlis (UniMAP) 2022
主題:	Effect of mixing Composites Nanoclay
在線閱讀:	http://dspace.unimap.edu.my:80/xmlui/handle/123456789/76926
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Mixing in the mechanically agitated bioreactor: ‘A matter of being stirred, not shaken’
由: Shaliza, Ibrahim, Prof.
出版: (2011)

Characterization and chemical oxidation of Nanoclay filled low density Polyethylene (LDPE) composites: the effect of Poly (acrylic acid)
由: Hafizan Hassan
出版: (2008)

Effect of mixing sequences on the properties of porous epoxy using toluenea as a soaking medium
由: Siti Noorkhartina, Ishak, et al.
出版: (2013)

$Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites$

Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
由: Kamarul Hazwan Kamaruddin
出版: (2008)

Kesan penambahan tanah liat nano tehadap kegagalan lenturan komposit Aluminium-Poliuretana
由: Fairuz, Zainuddin, et al.
出版: (2010)

Kesan penambahan tanah liat nano tehadap kegagalan lenturan komposit Aluminium-Poliuretana
由: Fairuz, Zainuddin, et al.
出版: (2010)

Priority-based parameter optimization strategy for reducing the effects of four-wave mixing on WDM system
由: Haider J., Abed, et al.
出版: (2014)

Priority-based parameter optimization strategy for reducing the effects of four-wave mixing on WDM system
由: Haider J., Abed, et al.
出版: (2014)

Comparison among different types of advanced modulation formats under four wave mixing effects
由: Haider Jabber, Abed, et al.
出版: (2014)

Comparison among different types of advanced modulation formats under four wave mixing effects
由: Haider J.A., et al.
出版: (2023)

Fuel mix in electricity generation, 1990-2000
由: Unit Perancang Ekonomi
出版: (2011)

Relationship between mixing time and concrete strength
由: M. N., Ikhsan, et al.
出版: (2010)

A Comparative Study of Warm Mix Asphalt at Different Temperatures and Bitumen Grades
由: Mohammad Haziq bin Alias
出版: (2023)

The Properties of Sma 20 Prepared by Warm Mix Procedure at Different Temperature and Bitumen Grade
由: Muhammad Hasif bin Che Awang
出版: (2023)

Laminar mixing performances of baffling, shaft eccentricity and unsteady mixing in a cylindrical vessel
由: Ng K.C., et al.
出版: (2023)

Comparison Between Hot Mix Process And Warm Mix Process Using Stone Mastic Asphalt
由: Nurul Aina Binti Azman
出版: (2023)

Mechanical properties of sugar palm fibre-reinforced epoxy composites
由: Leman, Zulkiflle
出版: (2009)

Comparison of Ordinary Least Square and Mixed-Effect Regression Models for Estimation of Tree Diameter Increment: A Case Study for Dipterocarpacea in Siem Reap, Cambodia
由: Suriyati Harun, et al.
出版: (2015)

Preparation of GNPs thermally conductive adhesive at different epoxy resin/curing agent ratio and mixing method
由: S. Jasmee, et al.
出版: (2022)

Ultrasound-aided mixing of sponge cake batter
由: Tan, Mei Ching
出版: (2011)

Equations for mix design of structural lightweight concrete
由: Abdullahi M., et al.
出版: (2023)

Investigation of Mechanical and Thermal Performance of Nanoclay Modified Concrete for Energy Efficiency
由: Hameed O.M., et al.
出版: (2024)

The environmental effect on tensile strength and modulus of elasticity of PP/cloth composite / Mohd Iswandi Abdul Aziz and Wan Azman Wan Alwi
由: Abdul Aziz, Mohd Iswandi, et al.
出版: (2001)

Recent four-wave mixing suppression methods
由: Abeda, H.J., et al.
出版: (2013)

Recent four-wave mixing suppression methods
由: Haider J., Abed, et al.
出版: (2014)

Green marketing: a marketing mix point of view
由: Mohammad Solaiman, et al.
出版: (2015)

Mixed shear mode and compression mode MRE isolator
由: Anas Najmi bin Azman
出版: (2023)

$Mode I fracture resistance of hot mix asphalt and warm mix asphalt$

Mode I fracture resistance of hot mix asphalt and warm mix asphalt
由: Hasan, Ziari, et al.
出版: (2012)

Optimization of parameters for machining hybrid carbon/ epoxy and aluminum 2024 composite laminates
由: Mohamad, Nurhaniza
出版: (2016)

Clay reinforced hyperbranched polyurethane nanocomposites based on palm oil polyol as shape memory materials
由: E.S., Ali,, et al.
出版: (2015)

Polyurethane/clay shape memory nanocomposites based on palm oil polyol
由: S.A., Zubir, et al.
出版: (2015)

Correlating composition design and properties of calcined kaolin geopolymeric powder
由: Liew, Yun Ming, et al.
出版: (2014)

The Effects Of Mixed Loading Of Banana With Mango During Post Harvest Storage Under Ambient Temperature
由: Noor Anizah binti Maarof
出版: (2010)

Design of test fixture for high cycle fatigue test of fiber-reinforced composite laminates / Mohd Zul-Azri Daud
由: Daud, Mohd Zul-Azri
出版: (2002)

Impact strength and morphological properties of kenaf/nano-silica/epoxy composites
由: Nirmal Singh Harband Singh
出版: (2024)

Burst strength and impact performance on glass fibre reinforced epoxy (GRE) composite pipes
由: Hawa, Ahmad
出版: (2016)

Development Of Porous Asphalt Using Warm Mix Processes
由: Danish Dzakirin Bin Abd Razak
出版: (2023)

Identifying effects of mixed marketing in solar devices
由: Firouze Hajialiakbari, et al.
出版: (2015)

Preparation And Characterization Of Epoxy Particlefilled Thermosetting Composites
由: Low , Lay Foon
出版: (2012)

A matlab program for diagnosis and adjustment of mix proportions of structural lightweight concrete
由: Abdullahi M., et al.
出版: (2023)