Cover Image

The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production

Link to publisher's homepage at http://ijneam.unimap.edu.my

Saved in:
Bibliographic Details
Main Authors: F.S. Khalid, M. Y. A. Aminuddin, A. N. Abdullah Al-Jaberi, Z. Zaki, J.M. Irwan, S. Ayob, Bassam A. Tayeh
Other Authors: faisalsh@uthm.edu.my
Format: Article
Language:English
Published: Universiti Malaysia Perlis (UniMAP) 2022
Subjects:
Recycled Concrete Aggregate
Crumb rubber
Brick
Strength
Durability
Online Access:http://dspace.unimap.edu.my:80/xmlui/handle/123456789/73692
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.unimap-73692
record_format dspace
spelling my.unimap-736922022-01-25T01:22:26Z The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production F.S. Khalid M. Y. A. Aminuddin A. N. Abdullah Al-Jaberi Z. Zaki J.M. Irwan S. Ayob Bassam A. Tayeh faisalsh@uthm.edu.my Recycled Concrete Aggregate Crumb rubber Brick Strength Durability Link to publisher's homepage at http://ijneam.unimap.edu.my During the last decades, it has been recognizing that a large volume of waste with growing concerned that wastes from construction and demolition (C&D) are increasing years by years. Most waste materials are left as a landfill material or illegally dumped. The environmental impact can be reduced by making more sustainable use of this waste by the recycling process. This study aims to establish the sustainable properties for sand cement bricks using Recycled Concrete Aggregate (RCA) and Crumb Rubber (CR) as partial sand aggregate replacement materials. The objectives of this study are to determine the optimum cement-sand ratio (1:5, 1:6, and 1:7) for sand cement brick through density, compressive strength, and water absorption tests. Then, investigate the mechanical properties and durability of sand cement bricks through shrinkage and carbonation and lastly identify the optimum percentages of RCA and CR as sand aggregate replacement in sand cement bricks. The brick specimens were prepared using 15%, 30%, 45%, and 60% of RCA and 1.5%, 3.0%, 4.5%, and 6.0% of CR by volume of sand with a water-cement ratio of 0.6. The size of the RCA used to measure less than 5 mm. Hence, the size of the sieved waste CR granules used is between 0.1 to 5 mm that made it physically similar to the size of fine aggregates. The overall results revealed that the best cement-sand ratio was 1:6. The density test indicates that the average density of sand cement bricks is lower than the control bricks. Besides, the percentage of water absorption for sand cement bricks was found to be satisfactory. In a nutshell, the optimal replacement of RCA and CR was R15C1.5 with a cement-sand ratio of 1:6 as it achieved the lowest values during the drying shrinkage and carbonation tests. 2022-01-25T01:22:26Z 2022-01-25T01:22:26Z 2021-08 Article International Journal of Nanoelectronics and Materials, vol.14(Special Issue), 2021, pages 29-42 1985-5761 (Printed) 1997-4434 (Online) http://dspace.unimap.edu.my:80/xmlui/handle/123456789/73692 http://ijneam.unimap.edu.my en Universiti Malaysia Perlis (UniMAP)
institution Universiti Malaysia Perlis
building UniMAP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Perlis
content_source UniMAP Library Digital Repository
url_provider http://dspace.unimap.edu.my/
language English
topic Recycled Concrete Aggregate
Crumb rubber
Brick
Strength
Durability
spellingShingle Recycled Concrete Aggregate
Crumb rubber
Brick
Strength
Durability
F.S. Khalid
M. Y. A. Aminuddin
A. N. Abdullah Al-Jaberi
Z. Zaki
J.M. Irwan
S. Ayob
Bassam A. Tayeh
The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
description Link to publisher's homepage at http://ijneam.unimap.edu.my
author2 faisalsh@uthm.edu.my
author_facet faisalsh@uthm.edu.my
F.S. Khalid
M. Y. A. Aminuddin
A. N. Abdullah Al-Jaberi
Z. Zaki
J.M. Irwan
S. Ayob
Bassam A. Tayeh
format Article
author F.S. Khalid
M. Y. A. Aminuddin
A. N. Abdullah Al-Jaberi
Z. Zaki
J.M. Irwan
S. Ayob
Bassam A. Tayeh
author_sort F.S. Khalid
title The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
title_short The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
title_full The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
title_fullStr The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
title_full_unstemmed The determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
title_sort determination of optimum ratio by using recycled concrete aggregate and crumb rubber as partial sand replacement material in sand cement brick production
publisher Universiti Malaysia Perlis (UniMAP)
publishDate 2022
url http://dspace.unimap.edu.my:80/xmlui/handle/123456789/73692
_version_ 1729704673446723584
score 13.222552

Similar Items