Cover Image

Tool Life and Surface Roughness of Titanium Based Alloy In Near Dry Turning Condition

Conference Venue : UniKL MFI

Saved in:

Bibliographic Details
Main Authors:	Muhamad Azri Bin Shamsuddin, Siti Hartini Hamdan, Ahmad Yasir Md Said, Azman Ismail
Format:
Published:	2013
Subjects:	Uncoated tungsten carbide (micro grain) Titanium alloy tool life surface roughness near dry machining
Online Access:	http://ir.unikl.edu.my/jspui/handle/123456789/4875
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Micro Hardness study on Titanium based alloy under dry turning process using uncoated micro grain tungsten carbide
by: Noor Suhaila Sood, Siti Hartini Hamdan, et al.
Published: (2013)

The effect of pulse DC and DC substrate bias during in situ cleaning PVD process on surface roughness
by: Hanizam, Hashim, et al.
Published: (2013)

Surface Integrity In Thread Cutting On Titanium Alloys Ti6AL-4V under dry condition
by: John Rizal Biki, Ahmad Yasir Md Said, et al.
Published: (2013)

Machining of nickel based alloys using different cemented carbide tools
by: Khidhir B.A., et al.
Published: (2023)

A study on the machining parameters optimization of WEDW machining TI-6AL-4V: effect on surface roughness, MRR and cutting speed
by: Ahmad Fairuz, Mansor
Published: (2008)

The study on Ultra-fine WC-6 wt.%Co for producing cutting tool inserts
by: Mohd Shirul Hassan
Published: (2009)

Performance of carbide cutting tools when machining of nickel based alloy
by: Noor M.M., et al.
Published: (2023)

A review on Alumina based ceramic composites as cutting and machining tool materials
by: Mary, Donnabelle Balela, et al.
Published: (2010)

A review on Alumina based ceramic composites as cutting and machining tool materials
by: Mary, Donnabelle Balela, et al.
Published: (2010)

Robust setting of Ti-6Al-4V machining using WEDM (Low Energy with Electrolysis Free Circuit Off )
by: Mohd Fauzely Mustapa Bakari
Published: (2008)

Study of surface roughness during droplet impact on a heated stainless steel surface
by: Azra Idzkandar, Abu Zahar
Published: (2021)

Studies on mechanical alloying of Copper-Tungsten Carbide composite for spot welding electrode
by: Zuhailawati, H, et al.
Published: (2009)

Investigate the effect of cutting parameter pn Ti6Al4V surface in EDM wire-cut
by: Anis Abdul Aziz
Published: (2008)

Study of surface roughness during droplet impact on a heated aluminum surface
by: Teevagar Gabrial Nayagam, Arulappan
Published: (2021)

FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy
by: Ali M.H., et al.
Published: (2023)

Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy
by: Khidhir B.A., et al.
Published: (2023)

Robust setting of Ti-6Al-4V machining using WEDM (High energy with EF Circuit Off)
by: Mohamad Nazeri Yahaya
Published: (2008)

Evaluate the effects of various surface roughness on the tribological characteristics under dry and lubricated conditions for Al-Si alloy
by: Riyadh A., Al-Samarai, et al.
Published: (2014)

Physical characterization of BST with different (x') ratios
by: Nurhafizah, Ramli, et al.
Published: (2014)

A Study on Tool Wear and Surface Finish by Applying Positive and Negative Rake Angle during Machining
by: Zailan Abdul Karim, et al.
Published: (2014)

The Influence of Solid Lubricant on machining quality in turning of S45C Mild Turning
by: Izatul Hamimi Abdul Razak, Nor Khamsi Ahmad, et al.
Published: (2013)

Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
by: Habeeb H.H., et al.
Published: (2023)

Design of multi-purpose carbide end mill
by: Ku, Harry, Dr., et al.
Published: (2011)

Investigate the effect of using sunflower oil as a lubricant during turning operation of stainless steel
by: Siti Aishah, Adam, et al.
Published: (2016)

The Influence of Solid Lubricant On Machining Quality in Turning of S45C Mild Steel
by: Izatul Hamimi Abdul Razak, Nor Khamsi Ahmad, et al.
Published: (2013)

Machining of nickel alloy 242 with cubic boron nitride tools
by: Habeeb H.H., et al.
Published: (2023)

Titanium and titanium alloys for the future metal working industry
by: Vijayaram, Thoguluva Raghavan, Dr.
Published: (2013)

Statistical model to determine surface roughness when milling hastelloy C-22HS
by: Kadirgama K., et al.
Published: (2023)

The effect of iron addition and tungsten content on the corrosion resistance of w-pre alloy brass composite
by: Rozi, Ewol
Published: (2017)

Optimization On Of Cutting Parameters (Turning) Using Taguchi Method For Nickel-Based Alloy
by: Teh Ewe Thong, Azri Hamim Abdul Aziz, et al.
Published: (2013)

A study on surface roughness of wood using CNC milling process
by: Mohd Suhairi, Saary
Published: (2016)

Microstructure Analysis on flooded thread cutting of titanium Alloy Ti-6Al-4V
by: Siti Hartini Hamdan, Mohd Naqiudddin Hussin, et al.
Published: (2013)

Robust setting of Ti-6Al-4V machining using WEDM (High Energy with EF Circuit Off)
by: Muhammad Noor Aliyas
Published: (2008)

Robust setting of Ti-6Al-4V machining using WEDM (High Energy with EF Circuit ON)
by: Raja Safwan Bin Raja Sulaiman
Published: (2008)

The role of the activator rich-W interboundary layer on liquid phase sintering of W-pre-alloy bronze composites of Fe and Co additions
by: Kahtan S, Muhammed, Dr., et al.
Published: (2013)

Optimization of cutting parameters for surface roughness in CNC turning machining with aluminum alloy 6061 material
by: Ali Abdullah, Mohammed Ahmed
Published: (2019)

Optimization of the machining parameters for tungsten oxide epoxy composite using the CNC milling machine under dry condition
by: Vanesha Ganeson
Published: (2023)

Investigation of surface roughness and chip formation on peck drilling of mild steel
by: Darrel Elroy, Soipu
Published: (2021)

Interrogation of surface roughness and bond force effect
by: Zaliman, Sauli, Dr.
Published: (2014)

Study of influence Plasma Arc cutting with response surface method
by: Mohd Faiz Che Dir
Published: (2008)