Performance of coated carbide tool in low speed milling of stainless steel under flood and mist lubrication
Most of the research works on the milling of stainless steel in the past were carried out at cutting speeds of higher than 100 m/min and had reported that the optimum speeds for milling steel were in the range of 100 m/min to 150 m/min. In some cases, milling at low speeds is inevitable. Some solid...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English English |
| 出版: |
2009
|
| 主题: | |
| 在线阅读: | https://eprints.ums.edu.my/id/eprint/43077/1/24%20PAGES.pdf https://eprints.ums.edu.my/id/eprint/43077/2/FULLTEXT.pdf https://eprints.ums.edu.my/id/eprint/43077/ |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|