The Emission and The Dispersion Characteristics of Air Pollutants: A Case Study of a Pulp and Paper Mill in Sipitang, Sabah

Pulp and paper is one of the highly polluting industries, most depicted energy and water exhaustive industrial sector in the world. This study aims to simulate the emission and the dispersion characteristics of SO₂ and NOₓ from a pulp and paper mill in Sipitang using AERMOD under the complex terrain...

詳細記述

保存先:
書誌詳細
主要な著者: Mohd Azwan Asmat, Justin Sentian, Franky Herman
フォーマット: Proceedings
言語:English
English
出版事項: Faculty of Science & Natural Resources, UMS 2023
主題:
オンライン・アクセス:https://eprints.ums.edu.my/id/eprint/39483/1/ABSTRACT.pdf
https://eprints.ums.edu.my/id/eprint/39483/2/FULL%20TEXT.pdf
https://eprints.ums.edu.my/id/eprint/39483/
https://www.ums.edu.my/fssa/index.php/research/conference-publication
タグ: タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
その他の書誌記述
要約:Pulp and paper is one of the highly polluting industries, most depicted energy and water exhaustive industrial sector in the world. This study aims to simulate the emission and the dispersion characteristics of SO₂ and NOₓ from a pulp and paper mill in Sipitang using AERMOD under the complex terrain. The meteorological data has been simulated using WRF due to the absence of complete data as the AERMOD input. Both pollutants found to be dispersed in the area between Sindumin and Lawas with almost all results showed the emission were below the Malaysia Ambient Standards except for All Sources - 1 Hour average (NOx, SO2, and Worst Case Scenario), Power Boiler - 1 Hour average (Worst Case Scenario), and the Recovery Boiler - 1 Hour average (NOx and Worse case scenario). The model underestimated the pollutants concentration compared with previous studies done on the same site. It should be noted that the model only simulated the pollutants concentration from these sources and not counting other sources in the area. In order to reduce the emission, it is suggested that the emission to be treated before being released to the environment. Future study should be done to evaluate the impact of the emission in the area shown in this study result.