Cover Image

A study of vibration features for rotating specimenunder cyclic loading

This thesis presented about a study of vibration features for rotating specimen under cyclic loading. From statistical, about 90% of the machines are a failure due to fatigue phenomena, thus need to monitor the fatigue behaviour on component (early detection) to avoid machine breakdown. The main obj...

Full description

Saved in:
Bibliographic Details
Main Author: Nazirul Azim, Mohd Asri
Format: Undergraduates Project Papers
Language:English
Published: 2013
Subjects:
TA Engineering (General). Civil engineering (General)
Online Access:http://umpir.ump.edu.my/id/eprint/8399/1/14.A%20STUDY%20OF%20VIBRATION%20FEATURES%20FOR%20ROTATING%20SPECIMEN%20UNDER%20CYCLIC%20LOADING.pdf
http://umpir.ump.edu.my/id/eprint/8399/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.ump.umpir.8399
record_format eprints
spelling my.ump.umpir.83992023-03-13T03:29:43Z http://umpir.ump.edu.my/id/eprint/8399/ A study of vibration features for rotating specimenunder cyclic loading Nazirul Azim, Mohd Asri TA Engineering (General). Civil engineering (General) This thesis presented about a study of vibration features for rotating specimen under cyclic loading. From statistical, about 90% of the machines are a failure due to fatigue phenomena, thus need to monitor the fatigue behaviour on component (early detection) to avoid machine breakdown. The main objectives of the project are to measure vibration response during cyclic loading and study the response under frequency domain analysis. The equipment involves are fatigue testing machine, accelerometer, and data acquisition (DAQ). The position of the accelerometer was placed near to the bearing housing. Then, create a block module using DASYLAB software to record the data. Result shows, signal at y-axis are dominant compared to the x-axis and z-axis. Signal value at y-axis is higher because of force applied are parallel to the y-axis that perpendicular to the specimen (vertical axis displacement). Signal at x-axis is lowest compare to the others axis, because at x-axis is parallel to the specimen. Thus, from this result more focus on y-axis data. For mild steel, at forces 250 N, the specimen fractured at 7769 cycles with amplitude value is 8.50, followed by 200 N at 23 238 cycle and 150 N at 100 510 cycles with amplitude 7.30 and 5.70 respectively. For low carbon steel, at 250 N the specimen fractured at 9400 cycles with amplitude value 9.59, higher than other load, at 200 N the specimen fractured at 24 300 cycle and 150 N at 137 749 cycles with amplitude value is 7.90 and 7.60, respectively. From the result, with constant force applied, the value of amplitude increase when the number of cycle increases. This is because, the power that transmits from the motor to the specimen will reduce the stiffness on the specimen, and the resistance will decrease. This increased loads can accelerate crack growth and ultimate failure can affect the changing amplitude for the specimen. 2013-06 Undergraduates Project Papers NonPeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/8399/1/14.A%20STUDY%20OF%20VIBRATION%20FEATURES%20FOR%20ROTATING%20SPECIMEN%20UNDER%20CYCLIC%20LOADING.pdf Nazirul Azim, Mohd Asri (2013) A study of vibration features for rotating specimenunder cyclic loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
institution Universiti Malaysia Pahang
building UMP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang
content_source UMP Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
topic TA Engineering (General). Civil engineering (General)
spellingShingle TA Engineering (General). Civil engineering (General)
Nazirul Azim, Mohd Asri
A study of vibration features for rotating specimenunder cyclic loading
description This thesis presented about a study of vibration features for rotating specimen under cyclic loading. From statistical, about 90% of the machines are a failure due to fatigue phenomena, thus need to monitor the fatigue behaviour on component (early detection) to avoid machine breakdown. The main objectives of the project are to measure vibration response during cyclic loading and study the response under frequency domain analysis. The equipment involves are fatigue testing machine, accelerometer, and data acquisition (DAQ). The position of the accelerometer was placed near to the bearing housing. Then, create a block module using DASYLAB software to record the data. Result shows, signal at y-axis are dominant compared to the x-axis and z-axis. Signal value at y-axis is higher because of force applied are parallel to the y-axis that perpendicular to the specimen (vertical axis displacement). Signal at x-axis is lowest compare to the others axis, because at x-axis is parallel to the specimen. Thus, from this result more focus on y-axis data. For mild steel, at forces 250 N, the specimen fractured at 7769 cycles with amplitude value is 8.50, followed by 200 N at 23 238 cycle and 150 N at 100 510 cycles with amplitude 7.30 and 5.70 respectively. For low carbon steel, at 250 N the specimen fractured at 9400 cycles with amplitude value 9.59, higher than other load, at 200 N the specimen fractured at 24 300 cycle and 150 N at 137 749 cycles with amplitude value is 7.90 and 7.60, respectively. From the result, with constant force applied, the value of amplitude increase when the number of cycle increases. This is because, the power that transmits from the motor to the specimen will reduce the stiffness on the specimen, and the resistance will decrease. This increased loads can accelerate crack growth and ultimate failure can affect the changing amplitude for the specimen.
format Undergraduates Project Papers
author Nazirul Azim, Mohd Asri
author_facet Nazirul Azim, Mohd Asri
author_sort Nazirul Azim, Mohd Asri
title A study of vibration features for rotating specimenunder cyclic loading
title_short A study of vibration features for rotating specimenunder cyclic loading
title_full A study of vibration features for rotating specimenunder cyclic loading
title_fullStr A study of vibration features for rotating specimenunder cyclic loading
title_full_unstemmed A study of vibration features for rotating specimenunder cyclic loading
title_sort study of vibration features for rotating specimenunder cyclic loading
publishDate 2013
url http://umpir.ump.edu.my/id/eprint/8399/1/14.A%20STUDY%20OF%20VIBRATION%20FEATURES%20FOR%20ROTATING%20SPECIMEN%20UNDER%20CYCLIC%20LOADING.pdf
http://umpir.ump.edu.my/id/eprint/8399/
_version_ 1761616560075571200
score 13.211869

Similar Items