Cover Image

Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL

Proper cutting parameters are needed to produce lower surface roughness of titanium alloy machined material. The high temperature in the cutting zone is always happened due to high friction between the tool and the workpiece and will cause dimensional error and poor surface roughness. Therefore, the...

Full description

Saved in:
Bibliographic Details
Main Authors: Siti Haryani, Tomadi, Nor Farah Huda, Abd Halim, Mas Ayu, Hassan, Rosdi, Daud, Muhammad Ariff, Zakaria
Format: Conference or Workshop Item
Language:English
English
Published: Springer Science and Business Media Deutschland GmbH 2023
Subjects:
T Technology (General)
TA Engineering (General). Civil engineering (General)
TJ Mechanical engineering and machinery
TK Electrical engineering. Electronics Nuclear engineering
TS Manufactures
Online Access:http://umpir.ump.edu.my/id/eprint/39074/1/Analysis%20and%20Optimum%20Machining%20Parameters%20on%20Surface%20Roughness.pdf
http://umpir.ump.edu.my/id/eprint/39074/2/Analysis%20and%20optimum%20machining%20parameters%20on%20surface%20roughness%20and%20material%20removal%20rate%20for%20titanium%20alloy%20in%20milling%20machining%20with%20MQL_ABS.pdf
http://umpir.ump.edu.my/id/eprint/39074/
https://doi.org/10.1007/978-981-19-9509-5_84
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.ump.umpir.39074
record_format eprints
spelling my.ump.umpir.390742023-11-14T03:31:38Z http://umpir.ump.edu.my/id/eprint/39074/ Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL Siti Haryani, Tomadi Nor Farah Huda, Abd Halim Mas Ayu, Hassan Rosdi, Daud Muhammad Ariff, Zakaria T Technology (General) TA Engineering (General). Civil engineering (General) TJ Mechanical engineering and machinery TK Electrical engineering. Electronics Nuclear engineering TS Manufactures Proper cutting parameters are needed to produce lower surface roughness of titanium alloy machined material. The high temperature in the cutting zone is always happened due to high friction between the tool and the workpiece and will cause dimensional error and poor surface roughness. Therefore, the main objectives of this research were to investigate and compare the surface roughness and material removal rate (MRR) of Ti-6AL-4 V alloy under the dry and minimum quantity lubrication (MQL) technique. The effect of cutting parameters towards surface roughness was investigated and the optimum cutting parameters was studied to obtain lower surface roughness and higher MRR. From ANOVA, spindle speed has been identified as the most significant parameter that affects the surface roughness and MRR. In t his paper, the optimum cutting parameters that give the low surface roughness and high MRR was 1500 rpm (spindle speed), 0.4 mm/tooth (feed per tooth), and 0.4 mm (depth of cut). From this study, it can be concluded that in this milling of Ti-6Al-4 V alloy, higher spindle speed, feed per tooth, and depth of cut are preferable to achieve the better surface quality of Ti-6Al-4 V alloy. Springer Science and Business Media Deutschland GmbH 2023 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/39074/1/Analysis%20and%20Optimum%20Machining%20Parameters%20on%20Surface%20Roughness.pdf pdf en http://umpir.ump.edu.my/id/eprint/39074/2/Analysis%20and%20optimum%20machining%20parameters%20on%20surface%20roughness%20and%20material%20removal%20rate%20for%20titanium%20alloy%20in%20milling%20machining%20with%20MQL_ABS.pdf Siti Haryani, Tomadi and Nor Farah Huda, Abd Halim and Mas Ayu, Hassan and Rosdi, Daud and Muhammad Ariff, Zakaria (2023) Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Lecture Notes in Mechanical Engineering; 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022 , Kuala Lumpur. pp. 637-643. (294689). ISSN 2195-4356 ISBN 978-981199508-8 https://doi.org/10.1007/978-981-19-9509-5_84
institution Universiti Malaysia Pahang Al-Sultan Abdullah
building UMPSA Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang Al-Sultan Abdullah
content_source UMPSA Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
English
topic T Technology (General)
TA Engineering (General). Civil engineering (General)
TJ Mechanical engineering and machinery
TK Electrical engineering. Electronics Nuclear engineering
TS Manufactures
spellingShingle T Technology (General)
TA Engineering (General). Civil engineering (General)
TJ Mechanical engineering and machinery
TK Electrical engineering. Electronics Nuclear engineering
TS Manufactures
Siti Haryani, Tomadi
Nor Farah Huda, Abd Halim
Mas Ayu, Hassan
Rosdi, Daud
Muhammad Ariff, Zakaria
Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
description Proper cutting parameters are needed to produce lower surface roughness of titanium alloy machined material. The high temperature in the cutting zone is always happened due to high friction between the tool and the workpiece and will cause dimensional error and poor surface roughness. Therefore, the main objectives of this research were to investigate and compare the surface roughness and material removal rate (MRR) of Ti-6AL-4 V alloy under the dry and minimum quantity lubrication (MQL) technique. The effect of cutting parameters towards surface roughness was investigated and the optimum cutting parameters was studied to obtain lower surface roughness and higher MRR. From ANOVA, spindle speed has been identified as the most significant parameter that affects the surface roughness and MRR. In t his paper, the optimum cutting parameters that give the low surface roughness and high MRR was 1500 rpm (spindle speed), 0.4 mm/tooth (feed per tooth), and 0.4 mm (depth of cut). From this study, it can be concluded that in this milling of Ti-6Al-4 V alloy, higher spindle speed, feed per tooth, and depth of cut are preferable to achieve the better surface quality of Ti-6Al-4 V alloy.
format Conference or Workshop Item
author Siti Haryani, Tomadi
Nor Farah Huda, Abd Halim
Mas Ayu, Hassan
Rosdi, Daud
Muhammad Ariff, Zakaria
author_facet Siti Haryani, Tomadi
Nor Farah Huda, Abd Halim
Mas Ayu, Hassan
Rosdi, Daud
Muhammad Ariff, Zakaria
author_sort Siti Haryani, Tomadi
title Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
title_short Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
title_full Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
title_fullStr Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
title_full_unstemmed Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
title_sort analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with mql
publisher Springer Science and Business Media Deutschland GmbH
publishDate 2023
url http://umpir.ump.edu.my/id/eprint/39074/1/Analysis%20and%20Optimum%20Machining%20Parameters%20on%20Surface%20Roughness.pdf
http://umpir.ump.edu.my/id/eprint/39074/2/Analysis%20and%20optimum%20machining%20parameters%20on%20surface%20roughness%20and%20material%20removal%20rate%20for%20titanium%20alloy%20in%20milling%20machining%20with%20MQL_ABS.pdf
http://umpir.ump.edu.my/id/eprint/39074/
https://doi.org/10.1007/978-981-19-9509-5_84
_version_ 1822923820880625664
score 13.234276

Similar Items