Efficiency of post-processing in PMU based state estimation of renewable energy microgrids

Power System State Estimation (SE) is a process for determining the state of all the buses in a power system (voltage magnitude and angle) based on measurements taken at a selection of a few buses. Traditionally, the only information that measurement devices could provide was the magnitude of the me...

Full description

Saved in:
Bibliographic Details
Main Authors: Abed, Amir Hameed, Alwan, Natheer, Abed, Munther Hameed, Dobrić, Goran
Format: Conference or Workshop Item
Language:English
English
Published: Institute of Electrical and Electronics Engineers Inc. 2023
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/38748/1/Efficiency%20of%20post-processing%20in%20PMU%20based%20state%20estimation.pdf
http://umpir.ump.edu.my/id/eprint/38748/2/Efficiency%20of%20post-processing%20in%20PMU%20based%20state%20estimation%20of%20renewable%20energy%20microgrids_ABS.pdf
http://umpir.ump.edu.my/id/eprint/38748/
https://doi.org/10.1109/PowerTech55446.2023.10202834
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.ump.umpir.38748
record_format eprints
spelling my.ump.umpir.387482023-11-06T04:26:10Z http://umpir.ump.edu.my/id/eprint/38748/ Efficiency of post-processing in PMU based state estimation of renewable energy microgrids Abed, Amir Hameed Alwan, Natheer Abed, Munther Hameed Dobrić, Goran QA75 Electronic computers. Computer science QA76 Computer software T Technology (General) TA Engineering (General). Civil engineering (General) Power System State Estimation (SE) is a process for determining the state of all the buses in a power system (voltage magnitude and angle) based on measurements taken at a selection of a few buses. Traditionally, the only information that measurement devices could provide was the magnitude of the measured signal. On the other hand, the Phasor Measurement Unit (PMU) can measure the current phasors of the directly linked lines as well as the voltage phasors (both angle and magnitude) of the bus at which it is located. However, achieving observability of the system using only PMU devices is very expensive. In order to determine the condition of a power system, phasor measurements are employed in addition to conventional measurements. In this paper, the use of PMU measurements to estimate the state of a renewable energy microgrid (REM) has been explained and the proposed method has been verified on IEEE 21 bus microgrid. The method makes use of PMU voltage and current data after post-processing, as well as a separate linear state estimator model that makes use of the state estimate from Weighted Least Square (WLS). Using the WLS state estimation approach from conventional data, the model first estimates the state in polar coordinates. This state is then combined with PMU measurements in rectangular coordinates, to predict the system's final state. Institute of Electrical and Electronics Engineers Inc. 2023 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/38748/1/Efficiency%20of%20post-processing%20in%20PMU%20based%20state%20estimation.pdf pdf en http://umpir.ump.edu.my/id/eprint/38748/2/Efficiency%20of%20post-processing%20in%20PMU%20based%20state%20estimation%20of%20renewable%20energy%20microgrids_ABS.pdf Abed, Amir Hameed and Alwan, Natheer and Abed, Munther Hameed and Dobrić, Goran (2023) Efficiency of post-processing in PMU based state estimation of renewable energy microgrids. In: 2023 IEEE Belgrade PowerTech, PowerTech 2023, 25-29 June 2023 , Belgrade. pp. 1-6.. ISBN 978-166548778-8 https://doi.org/10.1109/PowerTech55446.2023.10202834
institution Universiti Malaysia Pahang Al-Sultan Abdullah
building UMPSA Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang Al-Sultan Abdullah
content_source UMPSA Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
English
topic QA75 Electronic computers. Computer science
QA76 Computer software
T Technology (General)
TA Engineering (General). Civil engineering (General)
spellingShingle QA75 Electronic computers. Computer science
QA76 Computer software
T Technology (General)
TA Engineering (General). Civil engineering (General)
Abed, Amir Hameed
Alwan, Natheer
Abed, Munther Hameed
Dobrić, Goran
Efficiency of post-processing in PMU based state estimation of renewable energy microgrids
description Power System State Estimation (SE) is a process for determining the state of all the buses in a power system (voltage magnitude and angle) based on measurements taken at a selection of a few buses. Traditionally, the only information that measurement devices could provide was the magnitude of the measured signal. On the other hand, the Phasor Measurement Unit (PMU) can measure the current phasors of the directly linked lines as well as the voltage phasors (both angle and magnitude) of the bus at which it is located. However, achieving observability of the system using only PMU devices is very expensive. In order to determine the condition of a power system, phasor measurements are employed in addition to conventional measurements. In this paper, the use of PMU measurements to estimate the state of a renewable energy microgrid (REM) has been explained and the proposed method has been verified on IEEE 21 bus microgrid. The method makes use of PMU voltage and current data after post-processing, as well as a separate linear state estimator model that makes use of the state estimate from Weighted Least Square (WLS). Using the WLS state estimation approach from conventional data, the model first estimates the state in polar coordinates. This state is then combined with PMU measurements in rectangular coordinates, to predict the system's final state.
format Conference or Workshop Item
author Abed, Amir Hameed
Alwan, Natheer
Abed, Munther Hameed
Dobrić, Goran
author_facet Abed, Amir Hameed
Alwan, Natheer
Abed, Munther Hameed
Dobrić, Goran
author_sort Abed, Amir Hameed
title Efficiency of post-processing in PMU based state estimation of renewable energy microgrids
title_short Efficiency of post-processing in PMU based state estimation of renewable energy microgrids
title_full Efficiency of post-processing in PMU based state estimation of renewable energy microgrids
title_fullStr Efficiency of post-processing in PMU based state estimation of renewable energy microgrids
title_full_unstemmed Efficiency of post-processing in PMU based state estimation of renewable energy microgrids
title_sort efficiency of post-processing in pmu based state estimation of renewable energy microgrids
publisher Institute of Electrical and Electronics Engineers Inc.
publishDate 2023
url http://umpir.ump.edu.my/id/eprint/38748/1/Efficiency%20of%20post-processing%20in%20PMU%20based%20state%20estimation.pdf
http://umpir.ump.edu.my/id/eprint/38748/2/Efficiency%20of%20post-processing%20in%20PMU%20based%20state%20estimation%20of%20renewable%20energy%20microgrids_ABS.pdf
http://umpir.ump.edu.my/id/eprint/38748/
https://doi.org/10.1109/PowerTech55446.2023.10202834
_version_ 1822923741220306944
score 13.244109