Cover Image

Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids

Nowadays, using nanotechnology in science and industry improves the yield of different processes. The machining process using hybrid nanofluids requires further research to better understand the mechanism of tool wear and the fundamental aspects are not yet ventured. In machining, tool wear is commo...

Full description

Saved in:
Bibliographic Details
Main Authors: W., Safiei, M. M., Rahman, A. R., Yusoff, M. Y., Ali
Format: Conference or Workshop Item
Language:English
English
Published: Springer 2023
Subjects:
TJ Mechanical engineering and machinery
TS Manufactures
Online Access:http://umpir.ump.edu.my/id/eprint/38703/1/Wear%20Behaviour%20of%20Tungsten%20Carbide%20in%20End%20Milling%20Process%20of%20Aluminium%20Alloy%206061.pdf
http://umpir.ump.edu.my/id/eprint/38703/2/Wear%20Behaviour%20of%20Tungsten%20Carbide.pdf
http://umpir.ump.edu.my/id/eprint/38703/
https://doi.org/10.1007/978-981-99-1245-2_3
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.ump.umpir.38703
record_format eprints
spelling my.ump.umpir.387032023-09-27T07:13:40Z http://umpir.ump.edu.my/id/eprint/38703/ Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids W., Safiei M. M., Rahman A. R., Yusoff M. Y., Ali TJ Mechanical engineering and machinery TS Manufactures Nowadays, using nanotechnology in science and industry improves the yield of different processes. The machining process using hybrid nanofluids requires further research to better understand the mechanism of tool wear and the fundamental aspects are not yet ventured. In machining, tool wear is common problems that exist for quite some time. In addition, milling process of Aluminium Alloy was challenged due to a strong adhesion particularly in higher temperature. Deposition of chips material during the process at the tool edge may induce several tool failures such as build-up edge, chipping and flaking. Eventually, tool life, manufacturing cost and product quality were the factors that normally effects by tool wear. However, the severity of tool wear can be reduced by applying a cutting fluid to the tool-workpiece interface. This paper intends to discover the effects of tri-hybrid nanofluids in end milling process of Aluminium Alloy 6061-T6 mainly on wear conditions of uncoated and double-layered PVD coated inserts. In this research works, three different nanoparticles SiO2-Al2O3–ZrO2 were dispersed in 60:40 of deionized water and ethylene glycol. The concentration was prepared between 0.06 and 0.12 wt.%. The MQL system with assisted air pressure was employed to deliver newly developed tri-hybrid nanofluids. During metal cutting process, the metal working fluid was supplied intermittently based on flow rate setting in the MQL system to the cutting zone with a very minimal quantity. A single insert was used and changed for every 100 mm of cutting length at different machining parameters. The effects on wear mechanisms were closely examined at the flank area using scanning electron microscope. Through comprehensive investigation, the wear mechanisms consist of attrition, flaking, abrasion and coating delamination. Other phenomenon such as thermal crack was observed in the wear region. The tool failures have a relationship with machining parameters and cutting tool condition itself. It can be concluded that, coating delamination and abrasion quite severe for coated inserts. While, uncoated tools were severe with attrition mode of failures. At extreme machining condition, higher temperature and friction forces at the tool-workpiece interface have a significant effect on the tool failures. For further investigation, the effects of tri-hybrid nanofluids on wear behaviour of tungsten carbide inserts can be examined for other machining process with different workpiece material. Springer 2023 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/38703/1/Wear%20Behaviour%20of%20Tungsten%20Carbide%20in%20End%20Milling%20Process%20of%20Aluminium%20Alloy%206061.pdf pdf en http://umpir.ump.edu.my/id/eprint/38703/2/Wear%20Behaviour%20of%20Tungsten%20Carbide.pdf W., Safiei and M. M., Rahman and A. R., Yusoff and M. Y., Ali (2023) Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids. In: 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference, 27-28 Oktober 2022 , Surakarta, Indonesia. pp. 21-32.. ISSN 2195-4356 https://doi.org/10.1007/978-981-99-1245-2_3
institution Universiti Malaysia Pahang Al-Sultan Abdullah
building UMPSA Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang Al-Sultan Abdullah
content_source UMPSA Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
English
topic TJ Mechanical engineering and machinery
TS Manufactures
spellingShingle TJ Mechanical engineering and machinery
TS Manufactures
W., Safiei
M. M., Rahman
A. R., Yusoff
M. Y., Ali
Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids
description Nowadays, using nanotechnology in science and industry improves the yield of different processes. The machining process using hybrid nanofluids requires further research to better understand the mechanism of tool wear and the fundamental aspects are not yet ventured. In machining, tool wear is common problems that exist for quite some time. In addition, milling process of Aluminium Alloy was challenged due to a strong adhesion particularly in higher temperature. Deposition of chips material during the process at the tool edge may induce several tool failures such as build-up edge, chipping and flaking. Eventually, tool life, manufacturing cost and product quality were the factors that normally effects by tool wear. However, the severity of tool wear can be reduced by applying a cutting fluid to the tool-workpiece interface. This paper intends to discover the effects of tri-hybrid nanofluids in end milling process of Aluminium Alloy 6061-T6 mainly on wear conditions of uncoated and double-layered PVD coated inserts. In this research works, three different nanoparticles SiO2-Al2O3–ZrO2 were dispersed in 60:40 of deionized water and ethylene glycol. The concentration was prepared between 0.06 and 0.12 wt.%. The MQL system with assisted air pressure was employed to deliver newly developed tri-hybrid nanofluids. During metal cutting process, the metal working fluid was supplied intermittently based on flow rate setting in the MQL system to the cutting zone with a very minimal quantity. A single insert was used and changed for every 100 mm of cutting length at different machining parameters. The effects on wear mechanisms were closely examined at the flank area using scanning electron microscope. Through comprehensive investigation, the wear mechanisms consist of attrition, flaking, abrasion and coating delamination. Other phenomenon such as thermal crack was observed in the wear region. The tool failures have a relationship with machining parameters and cutting tool condition itself. It can be concluded that, coating delamination and abrasion quite severe for coated inserts. While, uncoated tools were severe with attrition mode of failures. At extreme machining condition, higher temperature and friction forces at the tool-workpiece interface have a significant effect on the tool failures. For further investigation, the effects of tri-hybrid nanofluids on wear behaviour of tungsten carbide inserts can be examined for other machining process with different workpiece material.
format Conference or Workshop Item
author W., Safiei
M. M., Rahman
A. R., Yusoff
M. Y., Ali
author_facet W., Safiei
M. M., Rahman
A. R., Yusoff
M. Y., Ali
author_sort W., Safiei
title Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids
title_short Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids
title_full Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids
title_fullStr Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids
title_full_unstemmed Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids
title_sort wear behaviour of tungsten carbide in end milling process of aluminium alloy 6061-t6 with minimal quantity of tri-hybrid nanofluids
publisher Springer
publishDate 2023
url http://umpir.ump.edu.my/id/eprint/38703/1/Wear%20Behaviour%20of%20Tungsten%20Carbide%20in%20End%20Milling%20Process%20of%20Aluminium%20Alloy%206061.pdf
http://umpir.ump.edu.my/id/eprint/38703/2/Wear%20Behaviour%20of%20Tungsten%20Carbide.pdf
http://umpir.ump.edu.my/id/eprint/38703/
https://doi.org/10.1007/978-981-99-1245-2_3
_version_ 1822923723930337280
score 13.234278

Similar Items