Cover Image

Testing statcom model in IEEE power system network using PSCAD software

In any transmission system, the ultimate goals are to transmit power with high quality, economical and low risk of system failure. The ever increasing of power demands and loads especially non-linear loads making the power system network become complex to operate and the system becomes insecure with...

Full description

Saved in:
Bibliographic Details
Main Author: Mohd Firdaus, Daud
Format: Undergraduates Project Papers
Language:English
Published: 2008
Subjects:
TK Electrical engineering. Electronics Nuclear engineering
Online Access:http://umpir.ump.edu.my/id/eprint/370/1/MOHD_FIRDAUS_BIN_DAUD.pdf
http://umpir.ump.edu.my/id/eprint/370/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.ump.umpir.370
record_format eprints
spelling my.ump.umpir.3702021-06-09T06:28:52Z http://umpir.ump.edu.my/id/eprint/370/ Testing statcom model in IEEE power system network using PSCAD software Mohd Firdaus, Daud TK Electrical engineering. Electronics Nuclear engineering In any transmission system, the ultimate goals are to transmit power with high quality, economical and low risk of system failure. The ever increasing of power demands and loads especially non-linear loads making the power system network become complex to operate and the system becomes insecure with large power flows without adequate control. One way to introduce power system control is by applying controller known as FACTS (Flexible AC Transmission System) controllers. STATCOM (Static Synchronous Compensator) is one of the FACTS controllers and can be introduced to the power system to regulate terminal voltage and to improve system’s stability. By using IEEE 4 bus power system network, the effectiveness of STATCOM is tested by applying the controller at the critical location of the power system. The critical location of a power system is determined by the voltage drop that falls below 0.95 or above 1.05. Using PSCAD/EMTDC simulation software, the simulations of STATCOM in IEEE 4 bus power system networks can be realized. To verify the PSCAD/EMTDC simulation results, load flow analysis are acquired using MATLAB software through Hadi Saadat’s load flow analysis method. With these softwares, both systems’ power flow can be compared to determine the effectiveness of STATCOM in the power transmission system. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/370/1/MOHD_FIRDAUS_BIN_DAUD.pdf Mohd Firdaus, Daud (2008) Testing statcom model in IEEE power system network using PSCAD software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
institution Universiti Malaysia Pahang
building UMP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang
content_source UMP Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
topic TK Electrical engineering. Electronics Nuclear engineering
spellingShingle TK Electrical engineering. Electronics Nuclear engineering
Mohd Firdaus, Daud
Testing statcom model in IEEE power system network using PSCAD software
description In any transmission system, the ultimate goals are to transmit power with high quality, economical and low risk of system failure. The ever increasing of power demands and loads especially non-linear loads making the power system network become complex to operate and the system becomes insecure with large power flows without adequate control. One way to introduce power system control is by applying controller known as FACTS (Flexible AC Transmission System) controllers. STATCOM (Static Synchronous Compensator) is one of the FACTS controllers and can be introduced to the power system to regulate terminal voltage and to improve system’s stability. By using IEEE 4 bus power system network, the effectiveness of STATCOM is tested by applying the controller at the critical location of the power system. The critical location of a power system is determined by the voltage drop that falls below 0.95 or above 1.05. Using PSCAD/EMTDC simulation software, the simulations of STATCOM in IEEE 4 bus power system networks can be realized. To verify the PSCAD/EMTDC simulation results, load flow analysis are acquired using MATLAB software through Hadi Saadat’s load flow analysis method. With these softwares, both systems’ power flow can be compared to determine the effectiveness of STATCOM in the power transmission system.
format Undergraduates Project Papers
author Mohd Firdaus, Daud
author_facet Mohd Firdaus, Daud
author_sort Mohd Firdaus, Daud
title Testing statcom model in IEEE power system network using PSCAD software
title_short Testing statcom model in IEEE power system network using PSCAD software
title_full Testing statcom model in IEEE power system network using PSCAD software
title_fullStr Testing statcom model in IEEE power system network using PSCAD software
title_full_unstemmed Testing statcom model in IEEE power system network using PSCAD software
title_sort testing statcom model in ieee power system network using pscad software
publishDate 2008
url http://umpir.ump.edu.my/id/eprint/370/1/MOHD_FIRDAUS_BIN_DAUD.pdf
http://umpir.ump.edu.my/id/eprint/370/
_version_ 1702169965236322304
score 13.211869

Similar Items