Synthesis and characterization of phase change material integrated with aluminium waste as the thermal energy storage medium
In this paper, an investigation of a new innovation of heat storage properties of thermal conductivity enhancement via a newly formulated composite consists of paraffin wax incorporated with waste aluminum can from solid municipal waste as the potential PCM composite was studied. The samples composi...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
IOP Publishing
2020
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/29877/1/10.%20Synthesis%20and%20characterization%20of%20phase%20change%20material%20integrated.pdf http://umpir.ump.edu.my/id/eprint/29877/ https://doi.org/10.1088/1757-899X/736/3/032004 https://doi.org/10.1088/1757-899X/736/3/032004 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In this paper, an investigation of a new innovation of heat storage properties of thermal conductivity enhancement via a newly formulated composite consists of paraffin wax incorporated with waste aluminum can from solid municipal waste as the potential PCM composite was studied. The samples composite was synthesized at different percentage of waste aluminum powder mass loading ranging from 0wt% until 100wt% into the paraffin wax and characterized. From differential scanning calorimetry (DSC) analysis, the rate of heat flow has been has found to be increased as more mass loading of waste aluminum was added. However, the latent heat during melting and freezing of DSC data has reduced. This is due to the high amount filler which has reduced the amount of PCM, whereby latent heat is only absorbed/released by the PCM; not the filler/additive. Besides that, the thermal stability has improved strongly when waste filler is added rather than lone paraffin PCM. The density of waste composite PCM materials has also be found to be higher and thus, has increased the heat flow between the materials and improves the energy storage process. From the addition of filler, the smooth surface of lone paraffin has improved as the surface area has becoming to be rougher and shinier, thus resulted with higher contact surface area. Therefore, the new formulated waste PCM composite of paraffin wax incorporated with aluminum waste ranging from 60wt% and above could become a promising material for TES medium. |
|---|