Cover Image

Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study

Partial combustion of syngas is often used to produce high-quality metallic iron in steel processing plant. Partial combustion unit (PCU) suffers from insufficient high temperature due to improper design configuration and heat loss. Consequently, higher rate of fuel injection and operating cost is r...

Full description

Saved in:
Bibliographic Details
Main Author: Law, Woon Phui
Format: Thesis
Language:English
Published: 2017
Subjects:
TP Chemical technology
Online Access:http://umpir.ump.edu.my/id/eprint/19534/19/Effect%20of%20nozzle%20assembly%2C%20insulation%20and%20operating%20condition%20on%20partial%20combustion%20unit%20performance%20%20computational%20fluid%20dynamics%20and%20experimental%20study.pdf
http://umpir.ump.edu.my/id/eprint/19534/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.ump.umpir.19534
record_format eprints
spelling my.ump.umpir.195342023-01-12T04:33:33Z http://umpir.ump.edu.my/id/eprint/19534/ Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study Law, Woon Phui TP Chemical technology Partial combustion of syngas is often used to produce high-quality metallic iron in steel processing plant. Partial combustion unit (PCU) suffers from insufficient high temperature due to improper design configuration and heat loss. Consequently, higher rate of fuel injection and operating cost is required to maintain the quality of iron. Hence, a proper retrofit of design on the PCU is vital to offer better combustion performance and to reduce fuel consumption. This work aims to address the issues by proposing several new nozzle assembly designs and by installing thermal insulator to the existing PCU. Three new nozzle assembly designs were proposed to offer better turbulent mixing, whereas four different thermal insulators (i.e., brick, iron cast, ceramic fibre and graphite felt) were tested to minimize the heat loss. Experimental measurement is not applicable for opaque wall of PCU and hence computational fluid dynamics (CFD) technique is used to study the reactive fluid flow and heat transfer in the PCU. CFD simulation of the PCU at extreme temperatures is challenging owing to the coupling between the turbulence, chemistry and heat transfer. Hence, a CFD simulation must be validated before it can be routinely used. The validation was performed using the LDV measurement of a scale-down PCU rig, as well as by comparing with the published measurements. Three turbulence models, namely standard k-ε (SKE), Reynolds stress model (RSM) and scale-adaptive simulation (SAS) were employed. Combustion reaction was modelled using the eddy dissipation model (EDM) and detailed chemistry flamelet models, whereas the heat transfer was calculated by considering a convection, conduction and radiation. Discrete ordinates (DO) and spherical harmonics (P-1) were used for radiative heat transfer. The inlet of PCU and nozzle is treated as inlet velocity with species mixture while the wall is assumed as non-slip boundary. The finding showed that the non-premixed flame model with detailed chemistry provided a better prediction with 6.58% of deviation from measured temperature. It was found that the prediction without considering radiation yielded over 9% error compared to < 7% error when radiation is modelled. The DO model gave the best prediction of radiative heat transfer with 5.65% of deviation. Besides that, all turbulence models provided a good prediction of outlet temperature with a deviation of less than 6% from measured data. However, SAS gave the best prediction with 5.25% of error. All new nozzle assembly designs achieved over 11% higher temperature where the nozzle with flat surface wing gave the best performance with over 45% increase in temperature than the original wingless PCU. It was found that 40% increase in oxygen flowrate increased the peak temperature by about 12%. Dual-lance was found more effective than the single-lance operating at a similar oxygen flowrate. In addition, installation of insulation enhanced over 17% of peak outlet temperature. The best insulation was achieved using ceramic fibre with 20.4% higher peak temperature than the original non-insulated PCU. The finding from this work may useful for design retrofitting of a PCU, whereby the CFD model can be employed to simulate the PCU performance and the LDV data can be used for validation. 2017-07 Thesis NonPeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/19534/19/Effect%20of%20nozzle%20assembly%2C%20insulation%20and%20operating%20condition%20on%20partial%20combustion%20unit%20performance%20%20computational%20fluid%20dynamics%20and%20experimental%20study.pdf Law, Woon Phui (2017) Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study. PhD thesis, Universiti Malaysia Pahang.
institution Universiti Malaysia Pahang
building UMP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang
content_source UMP Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
topic TP Chemical technology
spellingShingle TP Chemical technology
Law, Woon Phui
Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
description Partial combustion of syngas is often used to produce high-quality metallic iron in steel processing plant. Partial combustion unit (PCU) suffers from insufficient high temperature due to improper design configuration and heat loss. Consequently, higher rate of fuel injection and operating cost is required to maintain the quality of iron. Hence, a proper retrofit of design on the PCU is vital to offer better combustion performance and to reduce fuel consumption. This work aims to address the issues by proposing several new nozzle assembly designs and by installing thermal insulator to the existing PCU. Three new nozzle assembly designs were proposed to offer better turbulent mixing, whereas four different thermal insulators (i.e., brick, iron cast, ceramic fibre and graphite felt) were tested to minimize the heat loss. Experimental measurement is not applicable for opaque wall of PCU and hence computational fluid dynamics (CFD) technique is used to study the reactive fluid flow and heat transfer in the PCU. CFD simulation of the PCU at extreme temperatures is challenging owing to the coupling between the turbulence, chemistry and heat transfer. Hence, a CFD simulation must be validated before it can be routinely used. The validation was performed using the LDV measurement of a scale-down PCU rig, as well as by comparing with the published measurements. Three turbulence models, namely standard k-ε (SKE), Reynolds stress model (RSM) and scale-adaptive simulation (SAS) were employed. Combustion reaction was modelled using the eddy dissipation model (EDM) and detailed chemistry flamelet models, whereas the heat transfer was calculated by considering a convection, conduction and radiation. Discrete ordinates (DO) and spherical harmonics (P-1) were used for radiative heat transfer. The inlet of PCU and nozzle is treated as inlet velocity with species mixture while the wall is assumed as non-slip boundary. The finding showed that the non-premixed flame model with detailed chemistry provided a better prediction with 6.58% of deviation from measured temperature. It was found that the prediction without considering radiation yielded over 9% error compared to < 7% error when radiation is modelled. The DO model gave the best prediction of radiative heat transfer with 5.65% of deviation. Besides that, all turbulence models provided a good prediction of outlet temperature with a deviation of less than 6% from measured data. However, SAS gave the best prediction with 5.25% of error. All new nozzle assembly designs achieved over 11% higher temperature where the nozzle with flat surface wing gave the best performance with over 45% increase in temperature than the original wingless PCU. It was found that 40% increase in oxygen flowrate increased the peak temperature by about 12%. Dual-lance was found more effective than the single-lance operating at a similar oxygen flowrate. In addition, installation of insulation enhanced over 17% of peak outlet temperature. The best insulation was achieved using ceramic fibre with 20.4% higher peak temperature than the original non-insulated PCU. The finding from this work may useful for design retrofitting of a PCU, whereby the CFD model can be employed to simulate the PCU performance and the LDV data can be used for validation.
format Thesis
author Law, Woon Phui
author_facet Law, Woon Phui
author_sort Law, Woon Phui
title Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
title_short Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
title_full Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
title_fullStr Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
title_full_unstemmed Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
title_sort effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study
publishDate 2017
url http://umpir.ump.edu.my/id/eprint/19534/19/Effect%20of%20nozzle%20assembly%2C%20insulation%20and%20operating%20condition%20on%20partial%20combustion%20unit%20performance%20%20computational%20fluid%20dynamics%20and%20experimental%20study.pdf
http://umpir.ump.edu.my/id/eprint/19534/
_version_ 1755872493208338432
score 13.211869

Similar Items