Effect of pipe diameter in piping system using acoustic emission technique

This project was carried out as a study of effect of pipe diameter different and different pressure in piping system by using Acoustic Emission technique. The objective of this research is to investigate the flow rate in the piping system due to the pipe diameter difference and pressure different an...

全面介紹

Saved in:
書目詳細資料
主要作者: Wan Mohamad Asyraf, Wan Zahari
格式: Undergraduates Project Papers
語言:English
出版: 2010
主題:
在線閱讀:http://umpir.ump.edu.my/id/eprint/1913/1/Effect%20of%20pipe%20diameter%20in%20piping%20system%20using%20acoustic%20emission%20technique.pdf
http://umpir.ump.edu.my/id/eprint/1913/
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
id my.ump.umpir.1913
record_format eprints
spelling my.ump.umpir.19132023-10-04T01:22:06Z http://umpir.ump.edu.my/id/eprint/1913/ Effect of pipe diameter in piping system using acoustic emission technique Wan Mohamad Asyraf, Wan Zahari TA Engineering (General). Civil engineering (General) This project was carried out as a study of effect of pipe diameter different and different pressure in piping system by using Acoustic Emission technique. The objective of this research is to investigate the flow rate in the piping system due to the pipe diameter difference and pressure different and evaluates type of signal produce from the acoustic emission technique for each type of pipe diameter in piping systems. A test rigs consist of a galvanized steel pipe that have two different diameters to run the experiments. The liquid that has been used is water and it controlled by the ball valve to setting the three different pressures. The source of the AE signal was from the ball valve that controlled the pressure but the effect of different diameter also play it roll because it can give a different flow rate that will show either the flow of water is low or high turbulent flow. The signal was captured using AE sensor with help of Acoustic Emission Detector 2.1.3 software. For all pipe diameter and pressure, the values of hits, counts and RMS (average, minimum and maximum) were recorded and analyzed. All the value recorded was compared to the different of pipe diameter and different pressure. The result shows that there almost no AE activities on the pipe that has big diameter compare to the smaller one. The conclusion has shown that the big pipe diameter will secure the safety because of the flow of the water that enter the pipe is low in flow rate and produced low turbulent flow compare to the small pipe diameter. 2010-12 Undergraduates Project Papers NonPeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/1913/1/Effect%20of%20pipe%20diameter%20in%20piping%20system%20using%20acoustic%20emission%20technique.pdf Wan Mohamad Asyraf, Wan Zahari (2010) Effect of pipe diameter in piping system using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
institution Universiti Malaysia Pahang Al-Sultan Abdullah
building UMPSA Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang Al-Sultan Abdullah
content_source UMPSA Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
topic TA Engineering (General). Civil engineering (General)
spellingShingle TA Engineering (General). Civil engineering (General)
Wan Mohamad Asyraf, Wan Zahari
Effect of pipe diameter in piping system using acoustic emission technique
description This project was carried out as a study of effect of pipe diameter different and different pressure in piping system by using Acoustic Emission technique. The objective of this research is to investigate the flow rate in the piping system due to the pipe diameter difference and pressure different and evaluates type of signal produce from the acoustic emission technique for each type of pipe diameter in piping systems. A test rigs consist of a galvanized steel pipe that have two different diameters to run the experiments. The liquid that has been used is water and it controlled by the ball valve to setting the three different pressures. The source of the AE signal was from the ball valve that controlled the pressure but the effect of different diameter also play it roll because it can give a different flow rate that will show either the flow of water is low or high turbulent flow. The signal was captured using AE sensor with help of Acoustic Emission Detector 2.1.3 software. For all pipe diameter and pressure, the values of hits, counts and RMS (average, minimum and maximum) were recorded and analyzed. All the value recorded was compared to the different of pipe diameter and different pressure. The result shows that there almost no AE activities on the pipe that has big diameter compare to the smaller one. The conclusion has shown that the big pipe diameter will secure the safety because of the flow of the water that enter the pipe is low in flow rate and produced low turbulent flow compare to the small pipe diameter.
format Undergraduates Project Papers
author Wan Mohamad Asyraf, Wan Zahari
author_facet Wan Mohamad Asyraf, Wan Zahari
author_sort Wan Mohamad Asyraf, Wan Zahari
title Effect of pipe diameter in piping system using acoustic emission technique
title_short Effect of pipe diameter in piping system using acoustic emission technique
title_full Effect of pipe diameter in piping system using acoustic emission technique
title_fullStr Effect of pipe diameter in piping system using acoustic emission technique
title_full_unstemmed Effect of pipe diameter in piping system using acoustic emission technique
title_sort effect of pipe diameter in piping system using acoustic emission technique
publishDate 2010
url http://umpir.ump.edu.my/id/eprint/1913/1/Effect%20of%20pipe%20diameter%20in%20piping%20system%20using%20acoustic%20emission%20technique.pdf
http://umpir.ump.edu.my/id/eprint/1913/
_version_ 1822915704357126144
score 13.250246