Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite

This thesis mainly focuses on the effect of reinforcement volume fraction on the mechanical properties of Al-SiC composite. Nowadays, there are many approach is used to enhance the mechanical properties of composite. The only argument is which method will deliver the most effective result and exhibi...

全面介紹

Saved in:
書目詳細資料
主要作者: Mohamad Amirul Aliff, Yahya
格式: Undergraduates Project Papers
語言:English
出版: 2016
主題:
在線閱讀:http://umpir.ump.edu.my/id/eprint/16265/1/Effect%20of%20reinforcement%20volume%20fraction%20on%20the%20mechanical%20properties%20of%20the%20al-sic%20composite.pdf
http://umpir.ump.edu.my/id/eprint/16265/
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
id my.ump.umpir.16265
record_format eprints
spelling my.ump.umpir.162652023-10-06T03:13:19Z http://umpir.ump.edu.my/id/eprint/16265/ Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite Mohamad Amirul Aliff, Yahya TJ Mechanical engineering and machinery TS Manufactures This thesis mainly focuses on the effect of reinforcement volume fraction on the mechanical properties of Al-SiC composite. Nowadays, there are many approach is used to enhance the mechanical properties of composite. The only argument is which method will deliver the most effective result and exhibited better mechanical properties. The decrease in volume fraction of SiC particle increase its ductility but the hardness is decrease. Therefore, the objectives of this thesis is to investigate the effect of volume fraction on the mechanical properties of Al-SiC and to optimize the mechanical properties of Al-SiC to obtain optimum volume fraction. The experiment was carried out by the powder metallurgy process. The raw materials was mixed and compact in the hydraulic press to make the green compact samples. After that the samples were sintered in the sintering furnace. The samples were prepared with 10 and 15 vol% of the SiC particles. 20 Ton load was used as the compaction load of all the samples. After that the samples were prepared for the mechanical testing and microstructure observation. The microstructure was observe in the optical microscope. The density and hardness of the samples were measured and compared. The hardness was measured by the Vickers micro hardness testing machine as per the ASTM e348. The results showed that the 15 vol% of SiC reinforcement provided better mechanical proper as compared to the other volume fraction of the reinforcement. 2016-06 Undergraduates Project Papers NonPeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/16265/1/Effect%20of%20reinforcement%20volume%20fraction%20on%20the%20mechanical%20properties%20of%20the%20al-sic%20composite.pdf Mohamad Amirul Aliff, Yahya (2016) Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
institution Universiti Malaysia Pahang Al-Sultan Abdullah
building UMPSA Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang Al-Sultan Abdullah
content_source UMPSA Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
topic TJ Mechanical engineering and machinery
TS Manufactures
spellingShingle TJ Mechanical engineering and machinery
TS Manufactures
Mohamad Amirul Aliff, Yahya
Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
description This thesis mainly focuses on the effect of reinforcement volume fraction on the mechanical properties of Al-SiC composite. Nowadays, there are many approach is used to enhance the mechanical properties of composite. The only argument is which method will deliver the most effective result and exhibited better mechanical properties. The decrease in volume fraction of SiC particle increase its ductility but the hardness is decrease. Therefore, the objectives of this thesis is to investigate the effect of volume fraction on the mechanical properties of Al-SiC and to optimize the mechanical properties of Al-SiC to obtain optimum volume fraction. The experiment was carried out by the powder metallurgy process. The raw materials was mixed and compact in the hydraulic press to make the green compact samples. After that the samples were sintered in the sintering furnace. The samples were prepared with 10 and 15 vol% of the SiC particles. 20 Ton load was used as the compaction load of all the samples. After that the samples were prepared for the mechanical testing and microstructure observation. The microstructure was observe in the optical microscope. The density and hardness of the samples were measured and compared. The hardness was measured by the Vickers micro hardness testing machine as per the ASTM e348. The results showed that the 15 vol% of SiC reinforcement provided better mechanical proper as compared to the other volume fraction of the reinforcement.
format Undergraduates Project Papers
author Mohamad Amirul Aliff, Yahya
author_facet Mohamad Amirul Aliff, Yahya
author_sort Mohamad Amirul Aliff, Yahya
title Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
title_short Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
title_full Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
title_fullStr Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
title_full_unstemmed Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
title_sort effect of reinforcement volume fraction on the mechanical properties of the al-sic composite
publishDate 2016
url http://umpir.ump.edu.my/id/eprint/16265/1/Effect%20of%20reinforcement%20volume%20fraction%20on%20the%20mechanical%20properties%20of%20the%20al-sic%20composite.pdf
http://umpir.ump.edu.my/id/eprint/16265/
_version_ 1822918062002667520
score 13.250246