Modeling of Methyl Methacrylate Polymerization Using MATLAB
This paper presents a modeling of methyl methacrylate (MMA) polymerization with toluene in the presence of azo-bi’s-isobutyronitrile (AIBN) using MATLAB. This work aims to optimize the initial concentration of initiator and the reactor temperature to achieve a maximum monomer conversion in minimum b...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English English |
| Published: |
DeGruyter
2016
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/14372/1/Law_cppm-2015-0070%20pub.pdf http://umpir.ump.edu.my/id/eprint/14372/7/fkksa-2016-law-Modeling%20of%20Methyl%20Methacrylate%20Polymerization%20.pdf http://umpir.ump.edu.my/id/eprint/14372/ http://dx.doi.org/10.1515/cppm-2015-0070 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper presents a modeling of methyl methacrylate (MMA) polymerization with toluene in the presence of azo-bi’s-isobutyronitrile (AIBN) using MATLAB. This work aims to optimize the initial concentration of initiator and the reactor temperature to achieve a maximum monomer conversion in minimum batch time. The optimization of solution polymerization of MMA based on the three-stage polymerization model (TSPM) was performed using ode23t solver. The non-linear polymerization kinetics considered the gel, glass and cage effect to obtain a realistic prediction. The predicted reactor and jacket temperature showed a reasonable agreement with the experimental data, where the error is about 2.7 % and 2.3 %, respectively. The results showed that a maximum monomer conversion of 94 % was achieved at 0.126 kgmol m–3 of the initial concentration of AIBN and 346 K of the initial reactor temperature in 8,951 s (2.5 h). |
|---|