The effect of using different bed powder in PZT synthesis
In this study, different bedswhich are alumina and PZT powder were used, and their effect on Pb(Zr0.52Ti0.48)O3, (PZT)based ceramics sample was investigated. The mixed powder was pressed by using a hand press at 200 MPa, followed by sintering at 1150 °C for 1 hour. The sintered sample was then chara...
Saved in:
Main Authors: | N.F.K. Bahanurddin, J.J. Mohamed, Z.A. Ahmad |
---|---|
Format: | Conference or Workshop Item |
Published: |
2016
|
Online Access: | http://discol.umk.edu.my/id/eprint/9225/ http://www.sciencedirect.com/science/article/pii/S1876619616001595 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
The effect of aluminina or PZT powder as a bed of powder during sintering on the PZT properties
by: N. F. K. Bahanurddin, et al.
Published: (2016) -
Effects of compaction prressure on lead zirconate titanate piezoelectric and dielectric properties prepared via high planetary mill
by: Bahanurddin, N.F.K., et al.
Published: (2015) -
Design and simulation of PZT Piezoelectric Microphone
by: Muhammad Aiman Ab. Mahat
Published: (2008) -
Synthesis and Characterization of Sot-Gel Derived Single-Phase PZT Nanoparticles in Aqueous Polyol Solution
by: Zak, A.K., et al.
Published: (2010) -
Fabrication and characterization of microstacked PZT actuator for MEMS applications
by: Sabri, M.F.M., et al.
Published: (2015)