صورة الغلاف

Characterisation of silica-alumina ratio in ceramic porcelain materials

This research studies the characterisation of ceramic porcelain materials influenced by different ratio addition of alumina and silica. First, the mineralogical and chemical composition of ceramic porcelain materials were determined. Next, ceramic porcelain fabricated with different quantities of al...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلف الرئيسي: Ulaganathan, Rathesh Kumaran
التنسيق: Undergraduate Final Project Report
منشور في: 2020
الوصول للمادة أونلاين:http://discol.umk.edu.my/id/eprint/4376/
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
id my.umk.eprints.4376
record_format eprints
spelling my.umk.eprints.43762022-05-23T08:26:14Z http://discol.umk.edu.my/id/eprint/4376/ Characterisation of silica-alumina ratio in ceramic porcelain materials Ulaganathan, Rathesh Kumaran This research studies the characterisation of ceramic porcelain materials influenced by different ratio addition of alumina and silica. First, the mineralogical and chemical composition of ceramic porcelain materials were determined. Next, ceramic porcelain fabricated with different quantities of alumina-silica addition (25wt% of feldspar, 20wt. % of kaolin, 50wt. % of alumina and 0wt. % of silica) followed by increasing concentration of silica and decreasing concentration of alumina. These ceramic porcelain samples were fired at 900°C sintering temperature. The effect of different addition ratio of alumina-silica on the technological behaviour of the ceramic porcelain materials was assessed by X-Ray diffraction test, water absorption method, firing shrinkage values, density and apparent porosity. The results shown that the XRD diffraction pattern exhibited good phase changes in A30S20 composition. The water absorption rate was the highest in the same composition with 15.79 %, high density and highest apparent porosity, 2.83% compared to all other results. Based on the results, the structural and physical properties of ceramic porcelain with 30wt% alumina and 20wt% silica (A30S20) is identified as ideal composition for ceramic porcelain industry. 2020 Undergraduate Final Project Report NonPeerReviewed Ulaganathan, Rathesh Kumaran (2020) Characterisation of silica-alumina ratio in ceramic porcelain materials. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)
institution Universiti Malaysia Kelantan
building Perpustakaan Universiti Malaysia Kelantan
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Kelantan
content_source UMK Institutional Repository
url_provider http://umkeprints.umk.edu.my/
description This research studies the characterisation of ceramic porcelain materials influenced by different ratio addition of alumina and silica. First, the mineralogical and chemical composition of ceramic porcelain materials were determined. Next, ceramic porcelain fabricated with different quantities of alumina-silica addition (25wt% of feldspar, 20wt. % of kaolin, 50wt. % of alumina and 0wt. % of silica) followed by increasing concentration of silica and decreasing concentration of alumina. These ceramic porcelain samples were fired at 900°C sintering temperature. The effect of different addition ratio of alumina-silica on the technological behaviour of the ceramic porcelain materials was assessed by X-Ray diffraction test, water absorption method, firing shrinkage values, density and apparent porosity. The results shown that the XRD diffraction pattern exhibited good phase changes in A30S20 composition. The water absorption rate was the highest in the same composition with 15.79 %, high density and highest apparent porosity, 2.83% compared to all other results. Based on the results, the structural and physical properties of ceramic porcelain with 30wt% alumina and 20wt% silica (A30S20) is identified as ideal composition for ceramic porcelain industry.
format Undergraduate Final Project Report
author Ulaganathan, Rathesh Kumaran
spellingShingle Ulaganathan, Rathesh Kumaran
Characterisation of silica-alumina ratio in ceramic porcelain materials
author_facet Ulaganathan, Rathesh Kumaran
author_sort Ulaganathan, Rathesh Kumaran
title Characterisation of silica-alumina ratio in ceramic porcelain materials
title_short Characterisation of silica-alumina ratio in ceramic porcelain materials
title_full Characterisation of silica-alumina ratio in ceramic porcelain materials
title_fullStr Characterisation of silica-alumina ratio in ceramic porcelain materials
title_full_unstemmed Characterisation of silica-alumina ratio in ceramic porcelain materials
title_sort characterisation of silica-alumina ratio in ceramic porcelain materials
publishDate 2020
url http://discol.umk.edu.my/id/eprint/4376/
_version_ 1763303405528285184
score 13.251813

مواد مشابهة