Development of a control system for laser doppler imaging scanning technique using labview
To monitor a small region of skin tissue for blood perfusion mapping construction, a Y-Z scanning control system using X-Y mechanism was developed. This control system utilizes the combination of a Stepper Motor and a DC Motor. A GCP (Graphical Coded Programming) of LabVIEW is used to compute the sy...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2005
|
| Subjects: | |
| Online Access: | http://eprints.um.edu.my/9273/1/Development_of_a_control_system_for_laser_doppler_imaging_scanning_technique_using_labview.pdf http://eprints.um.edu.my/9273/ http://www.scopus.com/inward/record.url?eid=2-s2.0-69649093035&partnerID=40&md5=dbeb8e7e8b90a356aeee17af2b1fcbcd http://ieeexplore.ieee.org/xpls/absall.jsp?arnumber=4977198&tag=1 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | To monitor a small region of skin tissue for blood perfusion mapping construction, a Y-Z scanning control system using X-Y mechanism was developed. This control system utilizes the combination of a Stepper Motor and a DC Motor. A GCP (Graphical Coded Programming) of LabVIEW is used to compute the system driver controller via DAQ (Data Acquisition) card of PCI E-series. The results presented are based on experimental observation. Results show that the design is capable of performing the Y-Z scanning pattern up to 25 mm � 25 mm AOI (Area of Interest). © 2005 IEEE. |
|---|