No-core fiber by self-image length optimization for optical based refractive index sensor
No-core fiber has been widely demonstrated as an alternative refractive index sensor over conventional optical fiber sensors. However, previous works demonstrated that the self-image length optimization of this sensor only focused on simulation and formed a conclusion without data analysis. Hence, t...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Published: |
Elsevier Science Inc
2022
|
| Subjects: | |
| Online Access: | http://eprints.um.edu.my/40347/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | No-core fiber has been widely demonstrated as an alternative refractive index sensor over conventional optical fiber sensors. However, previous works demonstrated that the self-image length optimization of this sensor only focused on simulation and formed a conclusion without data analysis. Hence, the sensitivity provided does not follow the standard unit, providing a limited evaluation of the sensitivity for refractive index measurement. This paper investigates the no-core fiber at a fixed diameter of 125 mu m and varies the length based on the self-image index ranging from 1 to 4 indexes to evaluate the sensor sensitivity at the analyte refractive index ranging from 1.3000 RIU to 1.4000 RIU via experimental study. The results showed that the dip wavelength shift non-linearly increased for all the samples as the analyte refractive index increased. The overall analysis showed that there were significant changes in the sensitivity between the odd and even self-image indexes, and there were no significant sensitivity changes between them. The best sensor performance was achieved by the NCF length of 2.90 cm with two self-image indexes. The sensitivity achieved by the sensor was 104.64 nm/RIU and 241.30 nm/ RIU for analyte refractive index ranging from 1.3000 RIU to 1.3600 RIU and 1.36000 RIU to 1.4000 RIU, respectively, via a linear fitting plot. Meanwhile, the figure merit value obtained by the sensor was 1.45 RIU-1 and 3.75 RIU-1 at analyte RI of 1.3600 RIU and 1.4000 RIU, respectively. In the future, this can be used as a reference for no core fiber length optimization. |
|---|