Cover Image

Two-terminal fault detection and location for hybrid transmission circuit

This paper presents the algorithms developed to detect and locate the faults at a hybrid circuit. First, the fault detection algorithm was developed using the comparison of total positive-sequence fault current between pre-fault and fault times to detect the occurrence of a fault. Then, the voltage...

Full description

Saved in:
Bibliographic Details
Main Authors: Idris, Muhd Hafizi, Adzman, Mohd Rafi, Mokhlis, Hazlie, Tajuddin, Mohammad Faridun Naim, Hamid, Haziah, Amirruddin, Melaty
Format: Article
Published: Institute of Advanced Engineering and Science 2021
Subjects:
TK Electrical engineering. Electronics Nuclear engineering
Online Access:http://eprints.um.edu.my/35947/
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85112156731&doi=10.11591%2fijeecs.v23.i2.pp639-649&partnerID=40&md5=a6c12742a861f58af1e1207ba4de7415
http://doi.org/10.11591/ijeecs.v23.i2.pp639-649
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.um.eprints.35947
record_format eprints
spelling my.um.eprints.359472022-11-01T07:29:49Z http://eprints.um.edu.my/35947/ Two-terminal fault detection and location for hybrid transmission circuit Idris, Muhd Hafizi Adzman, Mohd Rafi Mokhlis, Hazlie Tajuddin, Mohammad Faridun Naim Hamid, Haziah Amirruddin, Melaty TK Electrical engineering. Electronics Nuclear engineering This paper presents the algorithms developed to detect and locate the faults at a hybrid circuit. First, the fault detection algorithm was developed using the comparison of total positive-sequence fault current between pre-fault and fault times to detect the occurrence of a fault. Then, the voltage check method was used to decide whether the fault occurred at overhead line (OHL) or cable section. Finally, the fault location algorithm using the impedance-based method and negative-sequence measurements from both terminals of the circuit were used to estimate the fault point from local terminal. From the tests of various fault conditions including different fault types, fault resistance and fault locations, the proposed method successfully detected all fault cases at around 1 cycle from fault initiation and with correct faulted section identification. Besides that, the fault location algorithm also has very accurate results of fault estimation with average error less than 1 km and 1. © 2021 Institute of Advanced Engineering and Science. All rights reserved. Institute of Advanced Engineering and Science 2021 Article PeerReviewed Idris, Muhd Hafizi and Adzman, Mohd Rafi and Mokhlis, Hazlie and Tajuddin, Mohammad Faridun Naim and Hamid, Haziah and Amirruddin, Melaty (2021) Two-terminal fault detection and location for hybrid transmission circuit. Indonesian Journal of Electrical Engineering and Computer Science, 23 (2). pp. 639-649. ISSN 2502-4752, DOI https://doi.org/10.11591/ijeecs.v23.i2.pp639-649 <https://doi.org/10.11591/ijeecs.v23.i2.pp639-649>. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85112156731&doi=10.11591%2fijeecs.v23.i2.pp639-649&partnerID=40&md5=a6c12742a861f58af1e1207ba4de7415 http://doi.org/10.11591/ijeecs.v23.i2.pp639-649
institution Universiti Malaya
building UM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaya
content_source UM Research Repository
url_provider http://eprints.um.edu.my/
topic TK Electrical engineering. Electronics Nuclear engineering
spellingShingle TK Electrical engineering. Electronics Nuclear engineering
Idris, Muhd Hafizi
Adzman, Mohd Rafi
Mokhlis, Hazlie
Tajuddin, Mohammad Faridun Naim
Hamid, Haziah
Amirruddin, Melaty
Two-terminal fault detection and location for hybrid transmission circuit
description This paper presents the algorithms developed to detect and locate the faults at a hybrid circuit. First, the fault detection algorithm was developed using the comparison of total positive-sequence fault current between pre-fault and fault times to detect the occurrence of a fault. Then, the voltage check method was used to decide whether the fault occurred at overhead line (OHL) or cable section. Finally, the fault location algorithm using the impedance-based method and negative-sequence measurements from both terminals of the circuit were used to estimate the fault point from local terminal. From the tests of various fault conditions including different fault types, fault resistance and fault locations, the proposed method successfully detected all fault cases at around 1 cycle from fault initiation and with correct faulted section identification. Besides that, the fault location algorithm also has very accurate results of fault estimation with average error less than 1 km and 1. © 2021 Institute of Advanced Engineering and Science. All rights reserved.
format Article
author Idris, Muhd Hafizi
Adzman, Mohd Rafi
Mokhlis, Hazlie
Tajuddin, Mohammad Faridun Naim
Hamid, Haziah
Amirruddin, Melaty
author_facet Idris, Muhd Hafizi
Adzman, Mohd Rafi
Mokhlis, Hazlie
Tajuddin, Mohammad Faridun Naim
Hamid, Haziah
Amirruddin, Melaty
author_sort Idris, Muhd Hafizi
title Two-terminal fault detection and location for hybrid transmission circuit
title_short Two-terminal fault detection and location for hybrid transmission circuit
title_full Two-terminal fault detection and location for hybrid transmission circuit
title_fullStr Two-terminal fault detection and location for hybrid transmission circuit
title_full_unstemmed Two-terminal fault detection and location for hybrid transmission circuit
title_sort two-terminal fault detection and location for hybrid transmission circuit
publisher Institute of Advanced Engineering and Science
publishDate 2021
url http://eprints.um.edu.my/35947/
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85112156731&doi=10.11591%2fijeecs.v23.i2.pp639-649&partnerID=40&md5=a6c12742a861f58af1e1207ba4de7415
http://doi.org/10.11591/ijeecs.v23.i2.pp639-649
_version_ 1748703485624320000
score 13.211869

Similar Items