Solid sharp-edged wire diamond dipole microstrip antenna / Sarah Yasmin Mohamad
This thesis presents a solid sharp-edge wire diamond dipole microstrip antenna for UWB applications, operating within the range of 3.1-10.6 GHz. The work was carried out in four stages; literature review, design and simulation using a commercial software, fabrication and finally, testing and analysi...
保存先:
| 第一著者: | |
|---|---|
| フォーマット: | 学位論文 |
| 言語: | English |
| 出版事項: |
2009
|
| 主題: | |
| オンライン･アクセス: | https://ir.uitm.edu.my/id/eprint/80847/1/80847.pdf https://ir.uitm.edu.my/id/eprint/80847/ |
| タグ: |
タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
|
| 要約: | This thesis presents a solid sharp-edge wire diamond dipole microstrip antenna for UWB applications, operating within the range of 3.1-10.6 GHz. The work was carried out in four stages; literature review, design and simulation using a commercial software, fabrication and finally, testing and analysis. A 3D electromagnetic simulator was used for designing and simulation of the antenna, with the following parameters; radiation efficiency of 88.14%, VSWR of 1.239, return loss of -19.440dB and gain of 7.694dBi. The antenna was fabricated using RT Duroid 5870 substrate with a 2.33 relative permittivity and was fed by coaxial feed. An analysis of a prototype antenna was carried out by using Vector Network Analyzer (VNA). It was observed that the simulated and the measured parameters concur well. |
|---|