Proximity coupled feed microstrip antenna with different shape of DGS / Suziyani Rohafauzi
This thesis presents an analysis and designing the proximity coupled feed microstrip antenna with different shape of DGS. Various shapes were designed such as H-shape, E-shape, double dumbbells shape and four slots under the transmission line. The performance parameters of these shapes are compared...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/80261/1/80261.pdf https://ir.uitm.edu.my/id/eprint/80261/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This thesis presents an analysis and designing the proximity coupled feed microstrip antenna with different shape of DGS. Various shapes were designed such as H-shape, E-shape, double dumbbells shape and four slots under the transmission line. The performance parameters of these shapes are compared to get the best results. The best design among these shape are four slots shapes. Four slots structure were design at ground below the feed line and this simulated antenna operating at 2.4GHz resonant frequency. The software used to simulate the patch antenna is Computer Simulation Tools (CST) Microwave Environment. This antenna is fed by a 50 Q. single microstrip line feeding with width 1.15 mm. In this thesis, the effects of antenna parameters like the frequency, return loss, voltage standing wave ratio (VSWR) and gain (dB) will study by using proximity coupler fed technique. The construction of the antenna consists of the microstrip feed line on a substrate proximity coupled to a single rectangular microstrip patch etched in top of surface. The dielectric constant of antenna is 4.7, the tangent loss 0.019 and thickness of the antenna is 0.8 mm. The proximity coupled antenna is measured using Vector Network Analyzer (VNA). Both the simulation and experimental results are compared and analyzed. |
|---|