Design a Butterworth microstrip hairpin band pass filter for Wireless Local Area Network (WLAN) application / Nor Hazirah Abu Bakar
This paper focuses on designing microstrip hairpin band pass filter for Wireless Local Area Network (WLAN) application. The Wireless Local Area Network (WLAN) is operated at frequency 2.4GHz until 5GHz. The filter is designed for a centre frequency of 3GHz and it operates within 10% operating bandwi...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2010
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/78370/1/78370.pdf https://ir.uitm.edu.my/id/eprint/78370/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper focuses on designing microstrip hairpin band pass filter for Wireless Local Area Network (WLAN) application. The Wireless Local Area Network (WLAN) is operated at frequency 2.4GHz until 5GHz. The filter is designed for a centre frequency of 3GHz and it operates within 10% operating bandwidth. The design specifications of the filter include insertion loss is not exceed than -3dB and the return loss is more than - 20dB. The filter was simulated with seventh order elements of the Butterworth. It includes the design, simulation, fabrication and measurements. The filter was designed using Genesys software and implemented on RT/Duroid. The simulation result precise to the specification result that about 100% in term of Center frequency (fc) ,High cut-off frequency (fl-I) and Low cut-off frequency (fL). The simulation result for return loss is -25 dB and the insertion loss is -2.451 dB which meet the specification requirement. About 5% value of return losses and 18.3% value of insertion losses difference between specification and simulation results which meet of specification requirement. Result for the comparison between specification and measurement is about 5% different of Center frequency (fc), 8% different of High cut-off frequency (fl-I), and about 4% different of Low cut-off frequency (fL). The measurement for return loss is -20.66 dB and the insertion loss is -2.918 dB which also meet the specification requirement, it about 3% for return losses and 1.3% for insertion losses. The objective to design, fabricate and measure the characteristics of a microstrip hairpin band-pass filter is achieved. A comparison between the measurement and simulation is presented that the measured response strongly influenced by fabricated process mg. |
|---|