Cover Image

Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim

Cleanliness of a machinery component is an important consideration to avoid machinery breakdown and application failures. Currently, industries are turning away from using chemical compounds and solvent for cleaning purpose due to its adverse effect on health and the environment. Efficiency and clea...

Full description

Saved in:
Bibliographic Details
Main Author: Ibrahim, Muhammad Aizuddin
Format: Thesis
Language:English
Published: 2004
Online Access:https://ir.uitm.edu.my/id/eprint/73945/1/73945.pdf
https://ir.uitm.edu.my/id/eprint/73945/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.73945
record_format eprints
spelling my.uitm.ir.739452024-05-20T07:21:32Z https://ir.uitm.edu.my/id/eprint/73945/ Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim Ibrahim, Muhammad Aizuddin Cleanliness of a machinery component is an important consideration to avoid machinery breakdown and application failures. Currently, industries are turning away from using chemical compounds and solvent for cleaning purpose due to its adverse effect on health and the environment. Efficiency and cleaning are two parameter that are demanded by the industry. Thermal cleaning using fluidized bed is an attractive, offering higher cleaning efficiency and flexibility in process control. Before fabricate this fluidized bed heat - cleaning system, there are some investigations to determine the parameter that involved in fluidized bed process. The experiment is done by using the Fluidization & Fluid Bed Heat Transfer Unit H 692 in the thermodynamics Laboratory. From that experiment, we observe that the parameters that give influence for that process are size and mass of solid particles, Bed Height of particles, distributor design, air flow rate, and pressure drop across the bed. After that experiment, a new design of bed rector for fluidized bed heat - cleaning process is fabricate. The design of this is base on the Fluidization & Fluid Bed Heat Transfer Unit H 692 with 90 cm in their height and 50 cm for their diameter. Then, continue that fabricate until the fluidized bed heat - cleaning process can exists. But, our project is only to make the fluidized process in the bed. The future fabricate will be continue to the other students in completing this project. 2004 Thesis NonPeerReviewed text en https://ir.uitm.edu.my/id/eprint/73945/1/73945.pdf Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
description Cleanliness of a machinery component is an important consideration to avoid machinery breakdown and application failures. Currently, industries are turning away from using chemical compounds and solvent for cleaning purpose due to its adverse effect on health and the environment. Efficiency and cleaning are two parameter that are demanded by the industry. Thermal cleaning using fluidized bed is an attractive, offering higher cleaning efficiency and flexibility in process control. Before fabricate this fluidized bed heat - cleaning system, there are some investigations to determine the parameter that involved in fluidized bed process. The experiment is done by using the Fluidization & Fluid Bed Heat Transfer Unit H 692 in the thermodynamics Laboratory. From that experiment, we observe that the parameters that give influence for that process are size and mass of solid particles, Bed Height of particles, distributor design, air flow rate, and pressure drop across the bed. After that experiment, a new design of bed rector for fluidized bed heat - cleaning process is fabricate. The design of this is base on the Fluidization & Fluid Bed Heat Transfer Unit H 692 with 90 cm in their height and 50 cm for their diameter. Then, continue that fabricate until the fluidized bed heat - cleaning process can exists. But, our project is only to make the fluidized process in the bed. The future fabricate will be continue to the other students in completing this project.
format Thesis
author Ibrahim, Muhammad Aizuddin
spellingShingle Ibrahim, Muhammad Aizuddin
Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim
author_facet Ibrahim, Muhammad Aizuddin
author_sort Ibrahim, Muhammad Aizuddin
title Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim
title_short Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim
title_full Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim
title_fullStr Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim
title_full_unstemmed Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim
title_sort cleaning automotive part using fluidized bed reactor / muhammad aizuddin ibrahim
publishDate 2004
url https://ir.uitm.edu.my/id/eprint/73945/1/73945.pdf
https://ir.uitm.edu.my/id/eprint/73945/
_version_ 1800100672568295424
score 13.211869

Similar Items