Free-space measurement of complex permittivity and complex permeability of polar and non-polar rubber composites at microwave frequency / Mohd Fiza Abdul Majid
This project involves a free-space measurement system operating in the 7.5-12.5 GHz frequency range to measure the reflection and transmission coefficients, Sn and S21, of planar samples. It involves measurements of the dielectric constant, loss factor and loss tangent of the rubber composites. The...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2003
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/69529/1/69529.pdf https://ir.uitm.edu.my/id/eprint/69529/ |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | This project involves a free-space measurement system operating in the 7.5-12.5 GHz frequency range to measure the reflection and transmission coefficients, Sn and S21, of planar samples. It involves measurements of the dielectric constant, loss factor and loss tangent of the rubber composites. The complex electric permittivity and the magnetic permeability are calculated from the measured values of Sn and S21 using FORTRAN 77 and Borlan C++ computer programs. The measurement system consists of transmit and receive horn lens antennas, a network analyzer, mode transitions and a computer. Diffraction effects at the edges of the samples are minimized by using spot focusing lens antennas. Errors due to multiple reflections between antennas via the surface of the samples are corrected by using a free-space LRL (line, reflect, line) calibration technique. Because of the samples used in this measurement is thin and flexible, it had to be sandwiched between two half-wavelength (at midband) quartz plates, to eliminates the effects of sagging. Results are reported in the operating frequency as stated above for the material used which is Teflon. To eliminate the effect of Teflon, Borlan C++ computer program is used. |
|---|