Modeling of dual-band bandpass filter with triangular shaped DGS / Nur Wahida Miskon

This thesis presents the design of dual-band bandpass filter with triangular shaped defective ground structure (DGS). The filter topology made up of a coupled line connected directly to line impedance with a same structure connected in parallel which produce a dual-path filter design. Triangular sha...

詳細記述

保存先:
書誌詳細
第一著者: Miskon, Nur Wahida
フォーマット: 学位論文
言語:English
出版事項: 2017
主題:
オンライン・アクセス:https://ir.uitm.edu.my/id/eprint/68916/1/68916.pdf
https://ir.uitm.edu.my/id/eprint/68916/
タグ: タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
その他の書誌記述
要約:This thesis presents the design of dual-band bandpass filter with triangular shaped defective ground structure (DGS). The filter topology made up of a coupled line connected directly to line impedance with a same structure connected in parallel which produce a dual-path filter design. Triangular shaped DGS is added to the design in order to observe the changes in frequency response. It is found that the implementation of triangular shaped DGS improves the first passband with centre frequency of 1.086 GHz when compared with non DGS filter. The optimised size of the DGS is 150 mm2 located at the centre and at the quarter wavelength lines of the filter.