Microwave balanced amplifier / Mahani Masran
The aim of this project is to investigate on the design of microwave balanced amplifier. The circuit design and simulation was implemented using a Computer Aided Design Package HP Eesof Libra. The amplifier was designed using a MESFET transistor NE 76038.The amplifier gives a system gain of 16.5 dB...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Student Project |
| 語言: | English |
| 出版: |
2003
|
| 主題: | |
| 在線閱讀: | https://ir.uitm.edu.my/id/eprint/67625/1/67625.pdf https://ir.uitm.edu.my/id/eprint/67625/ |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | The aim of this project is to investigate on the design of microwave balanced amplifier. The circuit design and simulation was implemented using a Computer Aided Design Package HP Eesof Libra. The amplifier was designed using a MESFET transistor NE 76038.The amplifier gives a system gain of 16.5 dB at 2 GHz, the measured noise figure at o.6 dB and T - 0.76 ˂ 28. The operating point was chosen at VDS = 3 V and IDS - 10 mA. A 3 dB branchline coupler was used in designing balanced amplifier. The performance of this branch line coupler was simulated by simulating its coupling, isolation and directivity. |
|---|