Cover Image

The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris

A door is a moving structure used to block off, and allow access to, an entrance to or within an enclosed space, such as a building or vehicle. Typically, doors have an interior side that faces the inside of a space and an exterior side that faces the outside of that space. In this project "Aut...

Full description

Saved in:
Bibliographic Details
Main Authors: Rosnan, Hani Baizura, Idris, Nurul Syazwani
Format: Student Project
Language:English
Published: 2015
Subjects:
Mechanical and electrical engineering combined
Detectors. Sensors. Sensor networks
Online Access:https://ir.uitm.edu.my/id/eprint/64778/1/64778.pdf
https://ir.uitm.edu.my/id/eprint/64778/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.64778
record_format eprints
spelling my.uitm.ir.647782022-10-27T05:04:06Z https://ir.uitm.edu.my/id/eprint/64778/ The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris Rosnan, Hani Baizura Idris, Nurul Syazwani Mechanical and electrical engineering combined Detectors. Sensors. Sensor networks A door is a moving structure used to block off, and allow access to, an entrance to or within an enclosed space, such as a building or vehicle. Typically, doors have an interior side that faces the inside of a space and an exterior side that faces the outside of that space. In this project "Automatic Door Opening System", the project is about opening and closing of the door automatically without using any effort from the human. The objective of the project is to help human inconvenience way and disabilities people. The project also required prototype that helps the student to learn more about hardware and components of the circuit. The circuit for automatic door used micro-controller PIC 16F778A that is programmed using MPLAB and PIC kit software. The circuit consists of Motor Driver IC L293D, LCD, potentiometer, capacitor, resistor and others. The input of the circuit is a PIR sensor that detects if movement is approaching near to it and send the code to the micro-controller. The output of the circuit is Unipolar stepper motor that rotates clockwise and anticlockwise representing the door is opening and closing. The project is supplied by 12volt for unipolar stepper motor and 9 volt for power supply. When the power supply is ON and the PIR sensor detects any movement, the motor will rotate, the LCD will show " MOTION SENSOR" and the buzzer will beep as well. Last procedure for the project is soldered to the strip board and troubleshoot if any problem is detected 2015-09 Student Project NonPeerReviewed text en https://ir.uitm.edu.my/id/eprint/64778/1/64778.pdf The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris. (2015) [Student Project] (Unpublished)
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
topic Mechanical and electrical engineering combined
Detectors. Sensors. Sensor networks
spellingShingle Mechanical and electrical engineering combined
Detectors. Sensors. Sensor networks
Rosnan, Hani Baizura
Idris, Nurul Syazwani
The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris
description A door is a moving structure used to block off, and allow access to, an entrance to or within an enclosed space, such as a building or vehicle. Typically, doors have an interior side that faces the inside of a space and an exterior side that faces the outside of that space. In this project "Automatic Door Opening System", the project is about opening and closing of the door automatically without using any effort from the human. The objective of the project is to help human inconvenience way and disabilities people. The project also required prototype that helps the student to learn more about hardware and components of the circuit. The circuit for automatic door used micro-controller PIC 16F778A that is programmed using MPLAB and PIC kit software. The circuit consists of Motor Driver IC L293D, LCD, potentiometer, capacitor, resistor and others. The input of the circuit is a PIR sensor that detects if movement is approaching near to it and send the code to the micro-controller. The output of the circuit is Unipolar stepper motor that rotates clockwise and anticlockwise representing the door is opening and closing. The project is supplied by 12volt for unipolar stepper motor and 9 volt for power supply. When the power supply is ON and the PIR sensor detects any movement, the motor will rotate, the LCD will show " MOTION SENSOR" and the buzzer will beep as well. Last procedure for the project is soldered to the strip board and troubleshoot if any problem is detected
format Student Project
author Rosnan, Hani Baizura
Idris, Nurul Syazwani
author_facet Rosnan, Hani Baizura
Idris, Nurul Syazwani
author_sort Rosnan, Hani Baizura
title The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris
title_short The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris
title_full The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris
title_fullStr The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris
title_full_unstemmed The automatic opening door system / Hani Baizura Rosnan & Nurul Syazwani Idris
title_sort automatic opening door system / hani baizura rosnan & nurul syazwani idris
publishDate 2015
url https://ir.uitm.edu.my/id/eprint/64778/1/64778.pdf
https://ir.uitm.edu.my/id/eprint/64778/
_version_ 1748183856969678848
score 13.211869

Similar Items