Cover Image

Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil

Kelempayan was successfully used in the manufacturing of urea formaldehyde particleboard at varying target board densities (525 kg/m3, 575 kg/m3 and 665 kg/m3), resin content (6%, 8% and 10%) with a board thickness of 12 mm. Increasing densities increases all the board properties significantly i...

Full description

Saved in:
Bibliographic Details
Main Authors: Yamani, Shaikh Abdul Karim, Kasim, Jamaludin, Abdul Jalil, Ashaari
Format: Article
Language:English
Published: Universiti Teknologi MARA Cawangan Pahang 2007
Subjects:
Timber
Malaysia
Wood products. Furniture
Online Access:http://ir.uitm.edu.my/id/eprint/36009/1/36009.PDF
http://ir.uitm.edu.my/id/eprint/36009/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.36009
record_format eprints
spelling my.uitm.ir.360092021-05-03T08:11:14Z http://ir.uitm.edu.my/id/eprint/36009/ Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil Yamani, Shaikh Abdul Karim Kasim, Jamaludin Abdul Jalil, Ashaari Timber Malaysia Wood products. Furniture Kelempayan was successfully used in the manufacturing of urea formaldehyde particleboard at varying target board densities (525 kg/m3, 575 kg/m3 and 665 kg/m3), resin content (6%, 8% and 10%) with a board thickness of 12 mm. Increasing densities increases all the board properties significantly in a linear fashion except for internal bond. An increase in resin content results in a significant effect on all the board properties. Modulus of rupture (MOR) increases in a definite trend, internal bond and screw withdrawal (SW) shows no trend while thickness swelling (TS) decreases. Boards with density of over 600 kg/m3 and a resin content of 10% meets the minimum requirements for the strength properties as stipulated in the BS Standards (BS 5669). However, all boards fail in the thickness swelling. Universiti Teknologi MARA Cawangan Pahang 2007-10 Article PeerReviewed text en http://ir.uitm.edu.my/id/eprint/36009/1/36009.PDF Yamani, Shaikh Abdul Karim and Kasim, Jamaludin and Abdul Jalil, Ashaari (2007) Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil. Jurnal Gading UiTM Pahang, 11 (1). pp. 39-45. ISSN 0128-5599
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
topic Timber
Malaysia
Wood products. Furniture
spellingShingle Timber
Malaysia
Wood products. Furniture
Yamani, Shaikh Abdul Karim
Kasim, Jamaludin
Abdul Jalil, Ashaari
Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil
description Kelempayan was successfully used in the manufacturing of urea formaldehyde particleboard at varying target board densities (525 kg/m3, 575 kg/m3 and 665 kg/m3), resin content (6%, 8% and 10%) with a board thickness of 12 mm. Increasing densities increases all the board properties significantly in a linear fashion except for internal bond. An increase in resin content results in a significant effect on all the board properties. Modulus of rupture (MOR) increases in a definite trend, internal bond and screw withdrawal (SW) shows no trend while thickness swelling (TS) decreases. Boards with density of over 600 kg/m3 and a resin content of 10% meets the minimum requirements for the strength properties as stipulated in the BS Standards (BS 5669). However, all boards fail in the thickness swelling.
format Article
author Yamani, Shaikh Abdul Karim
Kasim, Jamaludin
Abdul Jalil, Ashaari
author_facet Yamani, Shaikh Abdul Karim
Kasim, Jamaludin
Abdul Jalil, Ashaari
author_sort Yamani, Shaikh Abdul Karim
title Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil
title_short Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil
title_full Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil
title_fullStr Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil
title_full_unstemmed Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil
title_sort effects of board density and resin content on the strength and dimensional properties of particleboard from kelempayan (anthocephalus chinensis) / shaikh abdul karim yamani, jamaludin kasim and ashaari abdul jalil
publisher Universiti Teknologi MARA Cawangan Pahang
publishDate 2007
url http://ir.uitm.edu.my/id/eprint/36009/1/36009.PDF
http://ir.uitm.edu.my/id/eprint/36009/
_version_ 1699239961081937920
score 13.211869

Similar Items