Cover Image

Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak

Dye-sensitized solar cells (DSSCs) that belong to the third generation of solar cells are attractive due to cheap and ease of solar cell fabrication. Therefore, much research has been conducted to create an efficient solar cell. The following research illustrates for the first time development of al...

Full description

Saved in:
Bibliographic Details
Main Author: Ishak, Saurdi
Format: Thesis
Language:English
Published: 2018
Subjects:
Mechanics of engineering. Applied mechanics
Nanostructured materials
Online Access:https://ir.uitm.edu.my/id/eprint/26888/1/TP_SAURDI%20ISHAK%20EE%2018_5.pdf
https://ir.uitm.edu.my/id/eprint/26888/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.26888
record_format eprints
spelling my.uitm.ir.268882023-11-22T01:42:24Z https://ir.uitm.edu.my/id/eprint/26888/ Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak Ishak, Saurdi Mechanics of engineering. Applied mechanics Nanostructured materials Dye-sensitized solar cells (DSSCs) that belong to the third generation of solar cells are attractive due to cheap and ease of solar cell fabrication. Therefore, much research has been conducted to create an efficient solar cell. The following research illustrates for the first time development of aligned ZnO nanorod on Sn-doped ZnO films by using sonicated sol-gel immersion methods for dye-sensitized solar cells and the fabricated DSSCs show the improvement of photovoltaic properties and than from a novel photoanode of nano-composited aligned ZnO nanorod/TiO2:Nb a significant improvement on photovoltaic properties was obtained. The Sn-doped ZnO films were used as a seed layer for nanorod growth, where the Sn-doped ZnO films at 2 at.% shows the best of electrical and optical properties. As a result, the aligned ZnO nanorod with relatively high aspect ratio was grown on ITO-coated glass at 2 at.% Sn-doped ZnO films using sonicated sol-gel immersion methods. The resulting of ZnO nanorod length and diameter were around 1.8μm and 120nm, respectively. Since the absorption of dye is dependent to aspect ratio or surface area ZnO nanorod and therefore the fabricated DSSCs shows improvement of energy conversion efficiency 0.599% as compared to the fabricated DSSCs using aligned ZnO nanorod on undoped ZnO film, ZnO nanorod on 1 at.% Sn-doped ZnO film and ZnO nanorod on 3 at.% Sn-doped ZnO film were 0.107%, 0.250%, and 0.206%, respectively. Besides that, the surface area of aligned ZnO nanorod was increased by varying the solution concentration parameter. It was found that by using 0.03M Zinc acetate solution the aspect ratio of ZnO nanorod was higher as compared to 0.05M. Therefore, the fabricated DSSCs using 0.03M ZnO nanorod shows the improvement of efficiency to 0.989 %. The aligned ZnO nanorod with better aspect ratio and larger surface area was efficiently for dye absorption and light harvesting that contributed to the improvement of DSSCs. Meanwhile, the presence of TiO2 nanoparticles on top of ZnO nanorods might increase the internal surface area of photoanode that absorbed more dye molecules and resulting of increasing the photocurrent density 8.579 mA/cm2 as well as energy conversion efficiency of 2.543%. Furthermore, the improvement of DSSCs for nano-composited aligned ZnO nanorod/ TiO2:Nb was closely related to the improvement of electrical properties of TiO2 nanoparticle from Nb-doped TiO2 at 5 at.%. The Nb-doped TiO2 at 5 at.% shows higher of electrical properties that contributes better of electron transport properties. A novel photoanode of nanocomposited aligned ZnO nanorod/TiO2 with Nb-doped TiO2 at 5.% shows the significant improvement of photocurrent density and energy conversion efficiency of 18.156 mA/cm2 and 5.376%, respectively. The enhancement of energy conversion efficiency of the nano-composited aligned ZnO Nanorod/TiO2:Nb-5 at.% DSSCs can be due to the enhanced electron-injection efficiency caused by the positive shift in Vfb which help increase Jsc and reduce the charge recombination 2018 Thesis NonPeerReviewed text en https://ir.uitm.edu.my/id/eprint/26888/1/TP_SAURDI%20ISHAK%20EE%2018_5.pdf Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak. (2018) PhD thesis, thesis, Universiti Teknologi MARA.
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
topic Mechanics of engineering. Applied mechanics
Nanostructured materials
spellingShingle Mechanics of engineering. Applied mechanics
Nanostructured materials
Ishak, Saurdi
Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
description Dye-sensitized solar cells (DSSCs) that belong to the third generation of solar cells are attractive due to cheap and ease of solar cell fabrication. Therefore, much research has been conducted to create an efficient solar cell. The following research illustrates for the first time development of aligned ZnO nanorod on Sn-doped ZnO films by using sonicated sol-gel immersion methods for dye-sensitized solar cells and the fabricated DSSCs show the improvement of photovoltaic properties and than from a novel photoanode of nano-composited aligned ZnO nanorod/TiO2:Nb a significant improvement on photovoltaic properties was obtained. The Sn-doped ZnO films were used as a seed layer for nanorod growth, where the Sn-doped ZnO films at 2 at.% shows the best of electrical and optical properties. As a result, the aligned ZnO nanorod with relatively high aspect ratio was grown on ITO-coated glass at 2 at.% Sn-doped ZnO films using sonicated sol-gel immersion methods. The resulting of ZnO nanorod length and diameter were around 1.8μm and 120nm, respectively. Since the absorption of dye is dependent to aspect ratio or surface area ZnO nanorod and therefore the fabricated DSSCs shows improvement of energy conversion efficiency 0.599% as compared to the fabricated DSSCs using aligned ZnO nanorod on undoped ZnO film, ZnO nanorod on 1 at.% Sn-doped ZnO film and ZnO nanorod on 3 at.% Sn-doped ZnO film were 0.107%, 0.250%, and 0.206%, respectively. Besides that, the surface area of aligned ZnO nanorod was increased by varying the solution concentration parameter. It was found that by using 0.03M Zinc acetate solution the aspect ratio of ZnO nanorod was higher as compared to 0.05M. Therefore, the fabricated DSSCs using 0.03M ZnO nanorod shows the improvement of efficiency to 0.989 %. The aligned ZnO nanorod with better aspect ratio and larger surface area was efficiently for dye absorption and light harvesting that contributed to the improvement of DSSCs. Meanwhile, the presence of TiO2 nanoparticles on top of ZnO nanorods might increase the internal surface area of photoanode that absorbed more dye molecules and resulting of increasing the photocurrent density 8.579 mA/cm2 as well as energy conversion efficiency of 2.543%. Furthermore, the improvement of DSSCs for nano-composited aligned ZnO nanorod/ TiO2:Nb was closely related to the improvement of electrical properties of TiO2 nanoparticle from Nb-doped TiO2 at 5 at.%. The Nb-doped TiO2 at 5 at.% shows higher of electrical properties that contributes better of electron transport properties. A novel photoanode of nanocomposited aligned ZnO nanorod/TiO2 with Nb-doped TiO2 at 5.% shows the significant improvement of photocurrent density and energy conversion efficiency of 18.156 mA/cm2 and 5.376%, respectively. The enhancement of energy conversion efficiency of the nano-composited aligned ZnO Nanorod/TiO2:Nb-5 at.% DSSCs can be due to the enhanced electron-injection efficiency caused by the positive shift in Vfb which help increase Jsc and reduce the charge recombination
format Thesis
author Ishak, Saurdi
author_facet Ishak, Saurdi
author_sort Ishak, Saurdi
title Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
title_short Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
title_full Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
title_fullStr Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
title_full_unstemmed Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
title_sort fabrication of nanocomposited sn-doped zno/tio₂ based dye-sensitized solar cells / saurdi ishak
publishDate 2018
url https://ir.uitm.edu.my/id/eprint/26888/1/TP_SAURDI%20ISHAK%20EE%2018_5.pdf
https://ir.uitm.edu.my/id/eprint/26888/
_version_ 1783882125605339136
score 13.211869

Similar Items