表紙画像

Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam

This thesis investigated the behaviour of angular distortion due to multipass GMAW process using finite element method (FEM). Various cases studies were conducted started with basic welding structure of butt and T-joint which is considered as the preliminary study to develop the fundamental numerica...

詳細記述

保存先:
書誌詳細
第一著者: Lidam, Robert Ngendang
フォーマット: 学位論文
言語:English
出版事項: 2013
オンライン･アクセス:https://ir.uitm.edu.my/id/eprint/18453/3/18453.pdf
https://ir.uitm.edu.my/id/eprint/18453/
タグ: タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
id my.uitm.ir.18453
record_format eprints
spelling my.uitm.ir.184532024-05-30T04:56:53Z https://ir.uitm.edu.my/id/eprint/18453/ Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam Lidam, Robert Ngendang This thesis investigated the behaviour of angular distortion due to multipass GMAW process using finite element method (FEM). Various cases studies were conducted started with basic welding structure of butt and T-joint which is considered as the preliminary study to develop the fundamental numerical model. Further, the study was continued on the combined butt and T-joint to test the numerical model developed in the basic study of butt and T-joint before the models were applied on the ship panel application. Finally, the study was conducted on the ship panel (Laboratory Mock-up). In the simulation study, the distortion was analysed using 2D and 3D analysis based on thermo-elastic-plastic approach using FE software package SYS WELD 2010. It was found out that, 2D multipass analysis could be employed to obtain the fast average result of angular distortion while 3D multipass analysis to produce more accurate and complete results. To validate the simulation study, experimental investigations were conducted using fully automated robotic welding process. Almost all the simulation results were in good agreement with the experiments, except in 2D analysis on complex and large geometry. This result of the study indicates that the simulation study is reliable tool in predicting the welding induced distortion on the particular geometry and welding joint in this study. The effects of the clamping and welding sequence on distortion were also investigated in this study, and it was found out that the clamping condition and the welding sequences play a considerable factor in angular distortion. 2013-10 Thesis NonPeerReviewed text en https://ir.uitm.edu.my/id/eprint/18453/3/18453.pdf Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam. (2013) Masters thesis, thesis, Universiti Teknologi MARA. <http://terminalib.uitm.edu.my/18453.pdf>
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
description This thesis investigated the behaviour of angular distortion due to multipass GMAW process using finite element method (FEM). Various cases studies were conducted started with basic welding structure of butt and T-joint which is considered as the preliminary study to develop the fundamental numerical model. Further, the study was continued on the combined butt and T-joint to test the numerical model developed in the basic study of butt and T-joint before the models were applied on the ship panel application. Finally, the study was conducted on the ship panel (Laboratory Mock-up). In the simulation study, the distortion was analysed using 2D and 3D analysis based on thermo-elastic-plastic approach using FE software package SYS WELD 2010. It was found out that, 2D multipass analysis could be employed to obtain the fast average result of angular distortion while 3D multipass analysis to produce more accurate and complete results. To validate the simulation study, experimental investigations were conducted using fully automated robotic welding process. Almost all the simulation results were in good agreement with the experiments, except in 2D analysis on complex and large geometry. This result of the study indicates that the simulation study is reliable tool in predicting the welding induced distortion on the particular geometry and welding joint in this study. The effects of the clamping and welding sequence on distortion were also investigated in this study, and it was found out that the clamping condition and the welding sequences play a considerable factor in angular distortion.
format Thesis
author Lidam, Robert Ngendang
spellingShingle Lidam, Robert Ngendang
Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam
author_facet Lidam, Robert Ngendang
author_sort Lidam, Robert Ngendang
title Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam
title_short Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam
title_full Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam
title_fullStr Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam
title_full_unstemmed Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam
title_sort prediction of distortion on multipass gmaw process using fem and experimental validation / robert ngendang anak lidam
publishDate 2013
url https://ir.uitm.edu.my/id/eprint/18453/3/18453.pdf
https://ir.uitm.edu.my/id/eprint/18453/
_version_ 1800726657312489472
score 13.251813

類似資料