Cover Image

Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek

This study is focused on the structural behaviour of thin-walled open section when subjected to torsion. When a thin-walled open section is subjected to torsion it has tendency to twist and warp. If the thin-walled member is axially discontinuous, the warping deformation could affect the non-loaded...

Full description

Saved in:
Bibliographic Details
Main Author: Rafek, Mastura
Format: Thesis
Language:English
Published: 2013
Online Access:https://ir.uitm.edu.my/id/eprint/18364/3/18364.pdf
https://ir.uitm.edu.my/id/eprint/18364/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.18364
record_format eprints
spelling my.uitm.ir.183642024-05-31T00:16:25Z https://ir.uitm.edu.my/id/eprint/18364/ Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek Rafek, Mastura This study is focused on the structural behaviour of thin-walled open section when subjected to torsion. When a thin-walled open section is subjected to torsion it has tendency to twist and warp. If the thin-walled member is axially discontinuous, the warping deformation could affect the non-loaded member by significant twisting. A study of this behaviour pattern has been conducted and the results obtained are presented in this thesis. A general purpose commercial software that uses finite element method was used to model the axially discontinuous thin-walled open section frames. The numerical results were used to understand the twisting and warping transmission at the member intersection. For this present study, plain channel and lipped channel sections were used. Lips can be used to improve the strength of the section and also lips can reduce large angle of twist which leads to warping deformation. The results presented show that a frame with lipped channel section has value of angle of twist lesser than the equivalent frame with plain channel section with 41.07% for loaded member and 52.73% for nonleaded member respectively. In order to understand how the twist is transmitted through the axially discontinuous system, models with different types of joints were also carried out to investigate the magnitudes and directions of the twist for both loaded and non-leaded members. Apart from considering varieties of joint types, types of lips attached at the edges of the flanges were studied. A lip was folded one, two and three times to see the influence of each folded lip and this lip is called a compound lip. Folding of the lip can be in the direction of either inwardly or outwardly. The results show that the least twisting deformation structure is with diagonally inward lips with two folds. 2013-07 Thesis NonPeerReviewed text en https://ir.uitm.edu.my/id/eprint/18364/3/18364.pdf Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek. (2013) Masters thesis, thesis, Universiti Teknologi MARA. <http://terminalib.uitm.edu.my/18364.pdf>
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
description This study is focused on the structural behaviour of thin-walled open section when subjected to torsion. When a thin-walled open section is subjected to torsion it has tendency to twist and warp. If the thin-walled member is axially discontinuous, the warping deformation could affect the non-loaded member by significant twisting. A study of this behaviour pattern has been conducted and the results obtained are presented in this thesis. A general purpose commercial software that uses finite element method was used to model the axially discontinuous thin-walled open section frames. The numerical results were used to understand the twisting and warping transmission at the member intersection. For this present study, plain channel and lipped channel sections were used. Lips can be used to improve the strength of the section and also lips can reduce large angle of twist which leads to warping deformation. The results presented show that a frame with lipped channel section has value of angle of twist lesser than the equivalent frame with plain channel section with 41.07% for loaded member and 52.73% for nonleaded member respectively. In order to understand how the twist is transmitted through the axially discontinuous system, models with different types of joints were also carried out to investigate the magnitudes and directions of the twist for both loaded and non-leaded members. Apart from considering varieties of joint types, types of lips attached at the edges of the flanges were studied. A lip was folded one, two and three times to see the influence of each folded lip and this lip is called a compound lip. Folding of the lip can be in the direction of either inwardly or outwardly. The results show that the least twisting deformation structure is with diagonally inward lips with two folds.
format Thesis
author Rafek, Mastura
spellingShingle Rafek, Mastura
Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek
author_facet Rafek, Mastura
author_sort Rafek, Mastura
title Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek
title_short Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek
title_full Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek
title_fullStr Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek
title_full_unstemmed Torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / Mastura Rafek
title_sort torsional behaviour of axially discontinuous thin-walled steel frames using channel sections with compound stiffeners / mastura rafek
publishDate 2013
url https://ir.uitm.edu.my/id/eprint/18364/3/18364.pdf
https://ir.uitm.edu.my/id/eprint/18364/
_version_ 1800726653013327872
score 13.223943

Similar Items