Structural performance of steel fiber reinforced concrete two-ribbed wall panel under compressive load / Wan Azlina Wan Mohd Yusoff
This study deals with structural performance of two-ribbed wall both samples reinforces with steel fibre except one without steel fabric. Laboratory works tested two walls sample with size 1500mm x 1000mm x 75mm (height x length x width). The wall samples reinforced with steel fabric size B7 and ste...
Saved in:
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Civil Engineering
2014
|
| Online Access: | http://ir.uitm.edu.my/id/eprint/18115/2/PPb_WAN%20AZLINA%20WAN%20MOHD%20YUSOFF%20EC%2014_5.pdf http://ir.uitm.edu.my/id/eprint/18115/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This study deals with structural performance of two-ribbed wall both samples reinforces with steel fibre except one without steel fabric. Laboratory works tested two walls sample with size 1500mm x 1000mm x 75mm (height x length x width). The wall samples reinforced with steel fabric size B7 and steel fibre HE 0.75/60 with concrete grade 30. The wall panel tested under axial load connected to hydraulic jack with 2000 kN of capacity limit. The support condition of both walls is Pinned-Pinned. Analysis of results was done based on the ultimate load carrying capacity, wall displacement, mode of failure and cracking pattern. From experimental work, the ultimate load carrying capacity for wall with steel fabric (WSF) was 1590 kN and 1158.2 kN for wall without steel fabric (WOSF). Meanwhile, the theoretical calculation is 1177 kN and 999.34 kN respectively. Furthermore, the horizontal displacement was 10.79 mm for WSF and 22.84 mm for WOSF. The location of the maximum displacement is located at 1050 mm from the bottom while wall WOSF occurs approximately at 1350 mm (about 0.7H of the wall height). Wall WSF experienced crushing at the top end along load distribution area. |
|---|