Cover Image

In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen

The aim of this research is to investigate the cutting conditions applied with and without cutting fluid in order to obtain the proper cutting condition for the plain carbon steel with the coated carbide tool based on the consideration of the surface roughness of the machined part, the life of the c...

Full description

Saved in:
Bibliographic Details
Main Author: Tangjitsitcharoen, Somkiat
Format: Article
Language:English
Published: Faculty of Mechanical Engineering and University Publication Centre (UPENA) 2009
Online Access:http://ir.uitm.edu.my/id/eprint/17623/2/AJ_SOMKIAT%20TANGJITSITCHAROEN%20JME%2009.pdf
http://ir.uitm.edu.my/id/eprint/17623/
https://jmeche.uitm.edu.my/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.17623
record_format eprints
spelling my.uitm.ir.176232019-12-24T04:13:44Z http://ir.uitm.edu.my/id/eprint/17623/ In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen Tangjitsitcharoen, Somkiat The aim of this research is to investigate the cutting conditions applied with and without cutting fluid in order to obtain the proper cutting condition for the plain carbon steel with the coated carbide tool based on the consideration of the surface roughness of the machined part, the life of the cutting tool, and the use of minimum quantity lubrication (MQL). The applications of cutting fluid are wet cutting and mist cutting. The dynamometer is installed on the turret of CNC turning machine to measure the in-process cutting force. The in-process cutting forces obtained are examined and analyzed for the machinability of steel under various cutting conditions. The experimentally obtained results showed that the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and the tool wear can be well explained by the in-process cutting forces obtained. Referring to the criteria, the proper cutting condition determined is the dry cutting at a cutting speed of250 m/min, a feed rate of O. 15 mm/rev, and a depth of cut of 0.5 mm. Faculty of Mechanical Engineering and University Publication Centre (UPENA) 2009 Article PeerReviewed text en http://ir.uitm.edu.my/id/eprint/17623/2/AJ_SOMKIAT%20TANGJITSITCHAROEN%20JME%2009.pdf Tangjitsitcharoen, Somkiat (2009) In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen. Journal of Mechanical Engineering (JMechE), 6 (1). pp. 85-100. ISSN 1823-5514 ; 2550-164X https://jmeche.uitm.edu.my/
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
description The aim of this research is to investigate the cutting conditions applied with and without cutting fluid in order to obtain the proper cutting condition for the plain carbon steel with the coated carbide tool based on the consideration of the surface roughness of the machined part, the life of the cutting tool, and the use of minimum quantity lubrication (MQL). The applications of cutting fluid are wet cutting and mist cutting. The dynamometer is installed on the turret of CNC turning machine to measure the in-process cutting force. The in-process cutting forces obtained are examined and analyzed for the machinability of steel under various cutting conditions. The experimentally obtained results showed that the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and the tool wear can be well explained by the in-process cutting forces obtained. Referring to the criteria, the proper cutting condition determined is the dry cutting at a cutting speed of250 m/min, a feed rate of O. 15 mm/rev, and a depth of cut of 0.5 mm.
format Article
author Tangjitsitcharoen, Somkiat
spellingShingle Tangjitsitcharoen, Somkiat
In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen
author_facet Tangjitsitcharoen, Somkiat
author_sort Tangjitsitcharoen, Somkiat
title In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen
title_short In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen
title_full In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen
title_fullStr In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen
title_full_unstemmed In-process investigation of turning process applied with and without cutting fluid / Somkiat Tangjitsitcharoen
title_sort in-process investigation of turning process applied with and without cutting fluid / somkiat tangjitsitcharoen
publisher Faculty of Mechanical Engineering and University Publication Centre (UPENA)
publishDate 2009
url http://ir.uitm.edu.my/id/eprint/17623/2/AJ_SOMKIAT%20TANGJITSITCHAROEN%20JME%2009.pdf
http://ir.uitm.edu.my/id/eprint/17623/
https://jmeche.uitm.edu.my/
_version_ 1685648968183185408
score 13.211869

Similar Items