表紙画像

The influence of debond length on the buckling and wrinkling of sandwich beams under compressive load / Bambang K. Hadi

A two- and three-dimensional finite element analysis was carried out to analyze critical buckling loads of debonded sandwich beams. Both overall buckling and wrinkling were analyzed, using sandwich beams having 45 mm and 75 mm core thicknesses. The analysis shows that sandwich beams with 45 mm core...

保存先:

書誌詳細
フォーマット:	論文
言語:	English
出版事項:	UPENA 2007
オンライン･アクセス:	http://ir.uitm.edu.my/id/eprint/17540/1/AJ_BAMBANG%20K.%20HADI%20JME%2007.pdf http://ir.uitm.edu.my/id/eprint/17540/ https://jmeche.uitm.edu.my/
タグ:	タグ追加タグなし, このレコードへの初めてのタグを付けませんか!

類似資料

The design of a high aspect ratio HALE aircraft composite wing. part II: buckling and flutter speed analysis / Bambang K. Hadi and IndraPermana
著者:: Hadi, Bambang K., 等
出版事項: (2015)

Cylindrical shell buckling under axial compression load
著者:: Shah, Qasim Hussain, 等
出版事項: (2011)

Buckling Of Cones With Imperfect Length Subjected To Axial Compression
著者:: Ifayefunmi, Olawale, 等
出版事項: (2019)

Buckling Of Axially Compressed Cones With Imperfect Axial Length
著者:: Mahidan, Fairuz Mardhiah, 等
出版事項: (2020)

Further Experiments On Buckling Of Cones With Imperfect Length Subjected To Axial Compression
著者:: Ifayefunmi, Olawale, 等
出版事項: (2020)

BUCKLING BEHAVIOUR OF ANGLE SECTION BEAM WITH THE UNSTIFFENED FLANGES IN COMPRESSION
著者:: Sivakumar, Dhar Malingam, 等
出版事項: (2006)

Debonding failure analysis of prestressed FRP strengthened RC beams
著者:: Hoque, Nusrat, 等
出版事項: (2018)

Mitigation of plate end debonding in CFRP strengthened wide-flange steel I-beams under monotonic and fatigue loading / Mohamed Kamruzzaman
著者:: Mohamed, Kamruzzaman
出版事項: (2017)

Simulating Intermediate Crack Debonding on RC Beams Strengthened with Hybrid Methods
著者:: Shukri, Ahmad Azim, 等
出版事項: (2018)

Finite element modeling and analysis of a debonded smart beam in actuation
著者:: Butt, Mohammad Mursaleen, 等
出版事項: (2019)

Application of Statistical Design of Experiment (SDE) to study wrinkles and delamination defects on composite sandwich panels
著者:: Muhammad Iqbal, Muhammad Hussain, Dr., 等
出版事項: (2012)

Buckling Behaviour analysis of composite pipes under pure axial compressive loading using ANSYS Software
著者:: Jalaluddin, Izzat Imran
出版事項: (2018)

Embedded Connectors to Eliminate Debonding of Steel Plate for Optimal Shear Strengthening of RC Beam
著者:: Alam M.A., 等
出版事項: (2023)

Buckling Of Imperfect Cylinder-Cone-Cylinder Transition Under Axial Compression
著者:: Ifayefunmi, Olawale Friday, 等
出版事項: (2019)

Numerical analysis of aluminum foam sandwich subjected to compression loading
著者:: Al Hazza, Muataz Hazza Faizi, 等
出版事項: (2018)

Numerical analysis of aluminum foam sandwich subjected to compression loading
著者:: Al Hazza, Muataz Hazza Faizi, 等
出版事項: (2019)

Scaling Effects for Compression Loaded of Corrugated-core Sandwich Panels
著者:: M. R. M., Rejab, 等
出版事項: (2016)

Optimization of end anchors to eliminate premature debonding failure of flexurally strengthened R.C. beams
著者:: Soheil Nikpour Khoshkroudi
出版事項: (2024)

The design of a high aspect ratio HALE aircraft composite wing. part I: static strength analysis / Bambang K. Hadi, Muhammad A. Ghofur and IndraPermana
著者:: Hadi, Bambang K., 等
出版事項: (2015)

Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels
著者:: N. Z. M., Zaid, 等
出版事項: (2016)

Buckling of sandwich columns reinforced by triaxial weave fabric composite skin-sheets
著者:: Kueh, Ahmad B. H.
出版事項: (2012)

Classification of transient facial wrinkle
著者:: Rosdiyana, Samad, 等
出版事項: (2019)

Buckling Of Cracked Cones Subjected To Axial Compression
著者:: Ifayefunmi, Olawale Friday, 等
出版事項: (2020)

Buckling Experiments Of Cracked Axially Compressed Cones
著者:: Ifayefunmi, Olawale Friday
出版事項: (2020)

Behaviour of circular sandwich panel under dynamic loading
著者:: Alias, Amran, 等
出版事項: (2005)

Behaviour of circular sandwich panel under static loading
著者:: Alias, Amran, 等
出版事項: (2005)

Meshfree formulation of buckling of composite beam with slip
著者:: Harun, Mohd. Hamidi
出版事項: (2014)

Impact Behaviours of Bio-Inspired Sandwich Beam under Continuous Impacts
著者:: Tan, Juin Hwee
出版事項: (2020)

Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams
著者:: Alam, M.A., 等
出版事項: (2015)

Simulation of strengthened reinforced concrete beam debonding behaviour using global energy balance approach / Nusrat Hoque
著者:: Nusrat , Hoque
出版事項: (2018)

A new approach of shear connectors to delay debonding of CFRP laminates used for shear strengthening of RC beams
著者:: Jabbar A.S.A., 等
出版事項: (2023)

Prevention of Debonding Failure of Intermediate Anchor to Eliminate Premature Shear Failure of Flexurally Strengthened Reinforced Concrete Beams
著者:: Alam M.A., 等
出版事項: (2023)

Buckling analyses of triaxial weave fabric composites under thermal and mechanical loading
著者:: Muhammad Nor Hafidzi Mahat,
出版事項: (2013)

An Overview Of Buckling And Imperfection Of Cone-Cylinder Transition Under Various Loading Condition
著者:: Ifayefunmi, Olawale Friday, 等
出版事項: (2020)

Buckling analysis of compression member with trapezoidal web profile
著者:: Tan, Cher Siang
出版事項: (2005)

Performance of cruciform column using universal beam sections under axial compression load
著者:: Md. Tahir, Mahmood, 等
出版事項: (2005)

The flexural strength of polystyrene sandwich beam
著者:: Nur Hazwani, Alias
出版事項: (2013)

Honeycomb carbon sandwich composite panel under compressive load flat-wise: experimental analysis / Ramzyzan Ramly...[et al.]
著者:: Ramly, Ramzyzan, 等
出版事項: (2020)

Experimental study of intermediate length coupling beams subjected to monotonic load
著者:: Abu Bakar, Nabilah, 等
出版事項: (2017)

The behaviour of square sandwich panel Part I: under static loading
著者:: Alias, Amran, 等
出版事項: (2007)