Prefabricated wood i-joist from Laminated Veneer Lumber (LVL) flange and plywood parallel web / Nasrul Abdul Malik
I-joist component is using the system that involves the using of LVL rubberwood flanges and plywood parallel as web. Both component are combined and must work and act together. The strength will be same with solid wood. The purpose of this testing is to test the strength of I-joist that made from th...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | Student Project |
| اللغة: | English |
| منشور في: |
2002
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://ir.uitm.edu.my/id/eprint/108974/1/108974.PDF https://ir.uitm.edu.my/id/eprint/108974/ |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | I-joist component is using the system that involves the using of LVL rubberwood flanges and plywood parallel as web. Both component are combined and must work and act together. The strength will be same with solid wood. The purpose of this testing is to test the strength of I-joist that made from the combination between LVL as flanges and plywood parallel as web by using rubberwood. The sample of i-joist that has the highest modulus of rupture, MOR value was sample LP-3 (27.03 MPa) and the lowest was sample LP-7 (15.91 MPa). Furthermore, the testing was to test the modulus of elasticity true. Test shows the highest value was sample LP-3 (8025.56 MPa) and the lowest was sample LP-I (6628.81 MPa). As a conclusion to this study, flange and web components act together and perform as a system of I-joist. |
|---|