Design 16 to 1 Multiplexer using Mentor Graphics Design Tools / Nur Syafawati Hasan
The main purpose of this project is to design the 16 to 1 multiplexer layout using Mentor Graphics Design Tools. The main objectives of this project are to design 16 to 1 multiplexer using Mentor Graphics Design software, to produce the output waveform of multiplexer from simulation and design layou...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2007
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/103070/1/103070.PDF https://ir.uitm.edu.my/id/eprint/103070/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The main purpose of this project is to design the 16 to 1 multiplexer layout using Mentor Graphics Design Tools. The main objectives of this project are to design 16 to 1 multiplexer using Mentor Graphics Design software, to produce the output waveform of multiplexer from simulation and design layout to get the 16 to 1 multiplexer chip with application. The design based on basic multiplexer structure which consists of AND, OR and INVERTER CMOS gates. Full custom design flow is implemented in which the design starts with schematic foliowed by simulation for characterization purpose and validation. The layout of the multiplexer is achieved along with the post layout simulation and layout verification. The designed multiplexer is tested by simulation to determine the functionality and performance. |
|---|