Integrated multichannel electrochemical–quartz crystal microbalance sensors for liquid sensing
This paper highlights the design, simulation and fabrication of an array of twelve integrated electrochemical – quartz crystal microbalance (IEQCM) sensors on a single substrate for liquid sensing. Integration of both measurement techniques is made possible by combining the three electrode electro...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English English |
| Published: |
Institute of Electrical and Electronics Engineers Inc.
2020
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/78275/7/78275_Integrated%20Multichannel%20Electrochemical-Quartz_scopus.pdf http://irep.iium.edu.my/78275/13/78275_Integrated%20multichannel%20electrochemical%E2%80%93quartz.pdf http://irep.iium.edu.my/78275/ https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=8943177 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper highlights the design, simulation and fabrication of an array of twelve integrated
electrochemical – quartz crystal microbalance (IEQCM) sensors on a single substrate for liquid sensing.
Integration of both measurement techniques is made possible by combining the three electrode electrochemical device with the top and bottom electrodes for the microbalance. Important design parameters such as the
working electrode radius and gap spacing, were studied using both theoretical calculations and COMSOL
Multiphysics
R finite element simulations. The sensor’s working electrode radius affects the magnitude
of the frequency response while the gap affects the capacitance and current density which are important
for electrochemical measurements. It was found that the best values for the working electrode radius was
2 mm and gap spacing was 0.5 mm. The sensors were fabricated using microfabrication techniques for
the gold electrode and screen printing techniques for the reference electrode. Water contact angle, atomic
force microscopy, and scanning electron microscope were utilized to study the surface roughness of the
IEQCM sensor. IEQCM has a low contact angle of 53.0 ± 1
◦
and low surface roughness of 1.92nm.
For liquid sensing, an array of circular chambers were fabricated using polydimethylsiloxane (PDMS)
and placed on top of the quartz substrate for liquid testing. Electrochemical measurements and cyclic
voltammetry were performed using the sensor in ferri-ferrocyanide and phosphate buffered saline solution
to study the function of scan rates on the peak current with respect to the potential difference. For mass
sensing measurements, liquid water droplets of 1uL – 10 uL were placed onto the sensing surface and
the change in resonance frequencies of the sensors were measured. These resonance frequency changes
can be converted in mass change/area in accordance to the advanced Sauerbrey equation. The multichannel IEQCM sensor shows good potential as a parallel sensor for both biosensing and environmental
applications. |
|---|