Cover Image

Surface modification of HSLA steel and its fracture behavior

The use of a tungsten inert gas (TIG) welding torch process has resulted in the development of an economical route for surface engineering of alloys known as surface modification giving similar results to the more expensive high power laser process. Due to the preheating generated by this process, t...

Full description

Saved in:
Bibliographic Details
Main Authors: Abdullrhman Hossin, Musa, Maleque, Md. Abdul, Ali, Mohammad Yeakub
Format: Conference or Workshop Item
Language:English
Published: 2016
Subjects:
T54 Industrial safety
TA401 Materials of engineering and construction
TN600 Metallurgy
Online Access:http://irep.iium.edu.my/51665/1/51665_Surface_modification_of_HSLA.pdf
http://irep.iium.edu.my/51665/
http://www.iium.edu.my/icmaae/2016/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.iium.irep.51665
record_format dspace
spelling my.iium.irep.516652017-02-01T09:03:14Z http://irep.iium.edu.my/51665/ Surface modification of HSLA steel and its fracture behavior Abdullrhman Hossin, Musa Maleque, Md. Abdul Ali, Mohammad Yeakub T54 Industrial safety TA401 Materials of engineering and construction TN600 Metallurgy The use of a tungsten inert gas (TIG) welding torch process has resulted in the development of an economical route for surface engineering of alloys known as surface modification giving similar results to the more expensive high power laser process. Due to the preheating generated by this process, the extent of the temperature rise is sufficient to produce significant changes to the preplaced high melting point powders on the surface in terms of microstructure and mechanical properties. In this present study, the surface of high strength low alloy (HSLA) steel was surface modified with the preplacement of pure Titanium (Ti) powder using a tungsten inert gas (TIG) arc heat source, at 100 ampere current with a voltage 30 V and a constant traversing speed of 1.0 mm/s using Argon shielded gas. The effect of preplaced Ti powder on the strength and toughness properties of the modified HSLA steel surface was investigated. The results indicated that the tensile and yield strength of HSLA steel decreased by ~12% and ~14%, respectively. While the impact toughness increased by ~33% and the ductility decreased by ~50%. The fractography analysis results by scanning electron microscopy (SEM) were also presented in this paper. 2016-07 Conference or Workshop Item REM application/pdf en http://irep.iium.edu.my/51665/1/51665_Surface_modification_of_HSLA.pdf Abdullrhman Hossin, Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2016) Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished) http://www.iium.edu.my/icmaae/2016/
institution Universiti Islam Antarabangsa Malaysia
building IIUM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider International Islamic University Malaysia
content_source IIUM Repository (IREP)
url_provider http://irep.iium.edu.my/
language English
topic T54 Industrial safety
TA401 Materials of engineering and construction
TN600 Metallurgy
spellingShingle T54 Industrial safety
TA401 Materials of engineering and construction
TN600 Metallurgy
Abdullrhman Hossin, Musa
Maleque, Md. Abdul
Ali, Mohammad Yeakub
Surface modification of HSLA steel and its fracture behavior
description The use of a tungsten inert gas (TIG) welding torch process has resulted in the development of an economical route for surface engineering of alloys known as surface modification giving similar results to the more expensive high power laser process. Due to the preheating generated by this process, the extent of the temperature rise is sufficient to produce significant changes to the preplaced high melting point powders on the surface in terms of microstructure and mechanical properties. In this present study, the surface of high strength low alloy (HSLA) steel was surface modified with the preplacement of pure Titanium (Ti) powder using a tungsten inert gas (TIG) arc heat source, at 100 ampere current with a voltage 30 V and a constant traversing speed of 1.0 mm/s using Argon shielded gas. The effect of preplaced Ti powder on the strength and toughness properties of the modified HSLA steel surface was investigated. The results indicated that the tensile and yield strength of HSLA steel decreased by ~12% and ~14%, respectively. While the impact toughness increased by ~33% and the ductility decreased by ~50%. The fractography analysis results by scanning electron microscopy (SEM) were also presented in this paper.
format Conference or Workshop Item
author Abdullrhman Hossin, Musa
Maleque, Md. Abdul
Ali, Mohammad Yeakub
author_facet Abdullrhman Hossin, Musa
Maleque, Md. Abdul
Ali, Mohammad Yeakub
author_sort Abdullrhman Hossin, Musa
title Surface modification of HSLA steel and its fracture behavior
title_short Surface modification of HSLA steel and its fracture behavior
title_full Surface modification of HSLA steel and its fracture behavior
title_fullStr Surface modification of HSLA steel and its fracture behavior
title_full_unstemmed Surface modification of HSLA steel and its fracture behavior
title_sort surface modification of hsla steel and its fracture behavior
publishDate 2016
url http://irep.iium.edu.my/51665/1/51665_Surface_modification_of_HSLA.pdf
http://irep.iium.edu.my/51665/
http://www.iium.edu.my/icmaae/2016/
_version_ 1643614004892925952
score 13.211869

Similar Items