封面圖片

Finite element to predict damage of a polycarbonate armor plate subjected to impact

Numerical studies on the response of annor systems made up of PC and PMMA were reported [1] where smooth particle hydrodynamics (SPH) was used to simulate the response of PC and PMMA layers and it has been found that many existing material models can reproduce a close range results at the initial s...

Saved in:

書目詳細資料
Main Authors:	Shah, Qasim Hussain, Abid, Hasan M., Rosli, Adib
格式:	Book Chapter
語言:	English
出版:	IIUM Press 2011
主題:	TJ Mechanical engineering and machinery
在線閱讀:	http://irep.iium.edu.my/19847/1/Chapter_19.pdf http://irep.iium.edu.my/19847/ http://rms.research.iium.edu.my/bookstore/default.aspx
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Damage of polycarbonate armor plate subjected to impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

Impact resistance of a rectangular polycarbonate armor plate subjected to single and multiple impacts
由: Hussain Shah, Qasim
出版: (2009)

Failure mechanism of PC armor plates with PMMA sacrificial layer subjected to impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

Effect of distance from the support on the penetration mechanism of clamped circular polycarbonate armor plates
由: Hussain Shah, Qasim, et al.
出版: (2008)

Damage assessment of liquid filled container subjected to free fall on rigid steel plate
由: Shah, Qasim Hussain, et al.
出版: (2011)

Finite Element Modeling Of Ballistic Penetration into Fabric Armor
由: Talebi, Hossein
出版: (2006)

Perforation of polycarbonate sheet when subjected to impact test– A review
由: Hasan, Muhamad Abid, et al.
出版: (2017)

Numerical assessment of liquid filled container subjected to free fall on rigid steel plate
由: Shah, Qasim Hussain, et al.
出版: (2011)

Energy absorbing capability of materials subjected to impact under gravity loading
由: Shah, Qasim Hussain, et al.
出版: (2011)

Finite element analysis of a composite crash box subjected to low velocity impact
由: Shaik Dawood, Mohd. Sultan Ibrahim, et al.
出版: (2017)

Finite element modeling of composite plates with total imperfect interface subjected to impact loading
由: Ibrahim, Mohamud Abdirahman
出版: (2013)

Finite element modeling of laminated composite plates with locally delaminated interface subjected to impact loading
由: Abo Sabah, Saddam Hussein Ali
出版: (2013)

Finite element modeling of laminated composite plates with locally delaminated interface subjected to impact loading
由: Abo Sabah, Saddam Hussein, et al.
出版: (2014)

Experimental Damage Investigation of Composite Plates Subjected to Impact Loading Conditions
由: Mohd Sohaimi, Risby
出版: (2003)

Investigation of glass plate failure mechanism subjected to copper and steel projectile impacts
由: Shah, Qasim Hussain, et al.
出版: (2014)

Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress
由: Al-Yacouby, A.M., et al.
出版: (2022)

Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress
由: Al-Yacouby, A.M., et al.
出版: (2022)

The damage of unconfined granite edge due to the impact of varying stiffness projectiles
由: Shah, Qasim Hussain, et al.
出版: (2013)

3D finite element method of guided ultrasonic waves on composite plates with impact damage / Noorfaten Asyikin Ibrahim
由: Ibrahim, Noorfaten Asyikin
出版: (2020)

Finite Element Analysis on Reinforced Concrete Beams Subject to Impact
由: Hui, Ng Seh
出版: (2015)

Pipe whip impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

Development of a green combat armor
由: Radif, Zainab Shaker, et al.
出版: (2009)

Analysis of damage control of thin plate with piezoelectric actuators using finite element and machine learning approach
由: Anjum, Asraar, et al.
出版: (2023)

Structural failure analysis of polycarbonate enclosures of electronic devices subjected to multiple ball impacts
由: Yau, Yat Huang, et al.
出版: (2018)

Experimental setup of pipe whip impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

Experimental results of pipe whip impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

Simulation setup of pipe whip impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

Simulation results of pipe whip impact at 55° angle
由: Shah, Qasim Hussain, et al.
出版: (2011)

Simulation results of pipe whip impact at 90° angle
由: Shah, Qasim Hussain, et al.
出版: (2011)

$Finite element modelling of damage fracture and fretting fatigue$

Finite element modelling of damage fracture and fretting fatigue
由: Wahab, M. Abdel, et al.
出版: (2012)

My knight in shining armor / Sharina Saad
由: Saad, Sharina
出版: (2023)

Numerical analysis on materials energy absorbing capability under gravity loading impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

STRESS ANALYSIS OF STEEL PLATE WITH RECTANGULAR HOLES SUBJECTED TO AXIAL STRESS USING FINITE ELEMENT METHOD
由: Mazli, Arwie Amri
出版: (2021)

Strain rate effect on the failure strain and hardness of metallic armour plates subjected to high velocity projectile impact
由: Shah, Qasim H.
出版: (2006)

Effect of steel, cooper, and lead projectile impact on the damage process of brittle materials
由: Shah, Qasim Hussain
出版: (2012)

Finite Element Analysis Of Composite Ballistics Helmet Subjected To High Velocity Impact.
由: Othman, Rozaini
出版: (2009)

Monitoring of fatigue damage using ultrasonics and finite element analysis
由: Hrairi, Meftah, et al.
出版: (2012)

A ballistic composite armor and method of making the same.
由: Wong, Shaw Voon
出版: (2007)

Development of Combat Armor From Ramie-Aramidpolyester Composite
由: Radif, Zainab Shaker
出版: (2009)

Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification
由: Hassan, Mohamed Mohsen Abdel-Naeim, et al.
出版: (2014)