Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling
This paper discusses the fabrication of microfluidic channels using micro end milling and micro electrical discharge (ED) milling on metals and polymers. The width of the microchannels fabricated by micro end milling was 100-800 µm with 1-2 aspect ratio. The average surface roughness values were 100...
Saved in:
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Universiti Malaya
2009
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/1010/1/FABRICATION_OF_MICROFLUIDIC_CHANNEL_USING_MICRO_END_MILLING_AND.pdf http://irep.iium.edu.my/1010/ http://ejum.fsktm.um.edu.my/ArticleInformation.aspx?ArticleID=763 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|