AN AQUATIC QUALITY AUTOMATION SYSTEM (AQAS)
An Aquatic Quality Automation System (AQAS) is a system designed to monitor and control the water quality. This system usually installed at the wastewater treatment plant. Raw waters, such as water from river usually have a low pH value, which can be group as acid. This system is trying to neutra...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | Final Year Project |
| اللغة: | English |
| منشور في: |
Universiti Teknologi Petronas
2008
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://utpedia.utp.edu.my/7809/1/2008%20Bachelor%20-%20An%20Aquatic%20Quality%20Automation%20System%20%28AQAS%29.pdf http://utpedia.utp.edu.my/7809/ |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | An Aquatic Quality Automation System (AQAS) is a system designed to monitor and
control the water quality. This system usually installed at the wastewater treatment plant.
Raw waters, such as water from river usually have a low pH value, which can be group as
acid. This system is trying to neutralize the pH value as to make the pH value as close to
7 as possible. In this project, a controller for this system will be designed. The controller
will be designed to monitor and control the pH of the liquid in a Continuous Stirred Tank
Reactor (CSTR). pH control system is well-known as a difficult process due to the nonlinearity
of the titration curve of the pH itself.
In this project, a good controller will be designed to overcome the non-linearity of the pH
control system. pH value can varies significantly during neutralization process. The
controller designed must be set up at a typical specification and able to react accordingly
to the changes in pH during the whole process. PID controller will be designed for this
project. SIMULINK software will be use in this project to aid in the controller design
stage.
It is concluded that using the PID controller can actually be use for pH control system.
The SIMULINK software is a great help during the designing and simulation stage as to
optimize the PID controller. |
|---|