Cover Image

DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD

This work is designed to investigate the influence of numerous process parameters affecting the coating characteristics in a tangential fluidized bed through a series of experiments. The solution composing urea, starch, borate and lignin were here used as coating material. It was accordingly foll...

Full description

Saved in:
Bibliographic Details
Main Author: HASSAN, LUQMAN HAKIM
Format: Thesis
Language:English
Published: 2014
Subjects:
TP Chemical technology
Online Access:http://utpedia.utp.edu.my/21162/1/2014-CHEMICAL-DESIGN%20OPTIMIZATION%20OF%20COATING%20CHARACTERISTICS%20IN%20A%20TANGENTIAL%20FLUIDEIZED%20BED%20COATER%20USING%20TAGUCHI%20METHOD-LUQMAN%20HAKIM%20BIN%20HASSAN.pdf
http://utpedia.utp.edu.my/21162/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-utp-utpedia.21162
record_format eprints
spelling my-utp-utpedia.211622021-09-15T21:38:20Z http://utpedia.utp.edu.my/21162/ DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD HASSAN, LUQMAN HAKIM TP Chemical technology This work is designed to investigate the influence of numerous process parameters affecting the coating characteristics in a tangential fluidized bed through a series of experiments. The solution composing urea, starch, borate and lignin were here used as coating material. It was accordingly followed by studying the impact from the process parameters - inlet air temperature, disc rotation speed and spraying rate. The analyzed coating characteristics included mass coating variability, hardness strength and coating thickness and for optimization ofprocess parameters, Taguchi Method was used as the design of experiment. Further, to evaluate the coating characteristics, a series of nine experiments were executed based on L9orthogonal array and SN ratio here was used as response index. The results then showed that the optimum process parameters to produce the lowest mass coating variability were found in inlet air temperature at 80°C, disc rotation speed at 6.28 rad/s and spraying rate at 7.33x10"8 m3/s. 2014-11 Thesis NonPeerReviewed application/pdf en http://utpedia.utp.edu.my/21162/1/2014-CHEMICAL-DESIGN%20OPTIMIZATION%20OF%20COATING%20CHARACTERISTICS%20IN%20A%20TANGENTIAL%20FLUIDEIZED%20BED%20COATER%20USING%20TAGUCHI%20METHOD-LUQMAN%20HAKIM%20BIN%20HASSAN.pdf HASSAN, LUQMAN HAKIM (2014) DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD. Masters thesis, Universiti Teknologi PETRONAS.
institution Universiti Teknologi Petronas
building UTP Resource Centre
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Petronas
content_source UTP Electronic and Digitized Intellectual Asset
url_provider http://utpedia.utp.edu.my/
language English
topic TP Chemical technology
spellingShingle TP Chemical technology
HASSAN, LUQMAN HAKIM
DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD
description This work is designed to investigate the influence of numerous process parameters affecting the coating characteristics in a tangential fluidized bed through a series of experiments. The solution composing urea, starch, borate and lignin were here used as coating material. It was accordingly followed by studying the impact from the process parameters - inlet air temperature, disc rotation speed and spraying rate. The analyzed coating characteristics included mass coating variability, hardness strength and coating thickness and for optimization ofprocess parameters, Taguchi Method was used as the design of experiment. Further, to evaluate the coating characteristics, a series of nine experiments were executed based on L9orthogonal array and SN ratio here was used as response index. The results then showed that the optimum process parameters to produce the lowest mass coating variability were found in inlet air temperature at 80°C, disc rotation speed at 6.28 rad/s and spraying rate at 7.33x10"8 m3/s.
format Thesis
author HASSAN, LUQMAN HAKIM
author_facet HASSAN, LUQMAN HAKIM
author_sort HASSAN, LUQMAN HAKIM
title DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD
title_short DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD
title_full DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD
title_fullStr DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD
title_full_unstemmed DESIGN OPTIMIZATION OF COATING CHARACTERISTICS IN A TANGENTIAL FLUIDIZED BED COATER USING TAGUCHI METHOD
title_sort design optimization of coating characteristics in a tangential fluidized bed coater using taguchi method
publishDate 2014
url http://utpedia.utp.edu.my/21162/1/2014-CHEMICAL-DESIGN%20OPTIMIZATION%20OF%20COATING%20CHARACTERISTICS%20IN%20A%20TANGENTIAL%20FLUIDEIZED%20BED%20COATER%20USING%20TAGUCHI%20METHOD-LUQMAN%20HAKIM%20BIN%20HASSAN.pdf
http://utpedia.utp.edu.my/21162/
_version_ 1739832841223536640
score 13.211869

Similar Items