封面圖片

Development of Power Management Circuit for Hybrid Energy Harvester

Vibration-based energy harvester has become quite an impressive method and caught many interest in powering wireless sensor networks and low power devices in these past decades. Most of the research and literature use a stand-alone energy harvester transducer, among of them are piezoelectric, electr...

全面介紹

Saved in:
書目詳細資料
主要作者: Roslee, Muhamad Faris Izzuddin
格式: Final Year Project
語言:English
出版: 2017
在線閱讀:http://utpedia.utp.edu.my/19086/1/5.%20Dissertation.pdf
http://utpedia.utp.edu.my/19086/
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
id my-utp-utpedia.19086
record_format eprints
spelling my-utp-utpedia.190862019-06-20T11:05:44Z http://utpedia.utp.edu.my/19086/ Development of Power Management Circuit for Hybrid Energy Harvester Roslee, Muhamad Faris Izzuddin Vibration-based energy harvester has become quite an impressive method and caught many interest in powering wireless sensor networks and low power devices in these past decades. Most of the research and literature use a stand-alone energy harvester transducer, among of them are piezoelectric, electromagnetic and electrostatic. The development of power management circuit to rectify and regulate the output voltage from any energy harvesters are normally made for each of the transducer. The approach of using hybrid energy harvester which integrates both the piezoelectric and electrostatic is proposed to enhance the output voltage required to power up Internet of Things (IoT) device. This paper presents the development of power management circuit for hybrid energy harvester. A circuit which can cater two inputs from the hybrid energy harvester such as piezoelectric-electrostatic combination. The circuit composed of a full-wave bridge rectifier with a buck-boost converter running in discontinuous conduction mode (DCM) to maintain a constant input impedance through a fixed duty cycle for each of the transducers, and the usage of pulse voltage that connected to the gate MOSFET of both sources with the idea of integrating the two inputs from the transducers with a supercapacitor to store the output voltage of the energy harvester. The circuit rectifies the AC output from the hybrid energy harvester and produces a regulated DC output that is sufficient to power up the IoT device, an example in this project, NRF204L01, a single chip transceiver. The circuit is designed and simulated with Multisim to get an output voltage which is between 1.9 V to 3.6 V. The simulation result shows the output voltage generated by the circuit is 1.011 V with frequency of 100 Hz and 20 Hz for piezoelectric and electrostatic respectively. The experiment result shows the output voltage generated by the circuit is 400 mV which is lower compared to the simulation. Detailed analysis about the circuit is also discussed in this report. 2017-09 Final Year Project NonPeerReviewed application/pdf en http://utpedia.utp.edu.my/19086/1/5.%20Dissertation.pdf Roslee, Muhamad Faris Izzuddin (2017) Development of Power Management Circuit for Hybrid Energy Harvester. UNSPECIFIED.
institution Universiti Teknologi Petronas
building UTP Resource Centre
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Petronas
content_source UTP Electronic and Digitized Intellectual Asset
url_provider http://utpedia.utp.edu.my/
language English
description Vibration-based energy harvester has become quite an impressive method and caught many interest in powering wireless sensor networks and low power devices in these past decades. Most of the research and literature use a stand-alone energy harvester transducer, among of them are piezoelectric, electromagnetic and electrostatic. The development of power management circuit to rectify and regulate the output voltage from any energy harvesters are normally made for each of the transducer. The approach of using hybrid energy harvester which integrates both the piezoelectric and electrostatic is proposed to enhance the output voltage required to power up Internet of Things (IoT) device. This paper presents the development of power management circuit for hybrid energy harvester. A circuit which can cater two inputs from the hybrid energy harvester such as piezoelectric-electrostatic combination. The circuit composed of a full-wave bridge rectifier with a buck-boost converter running in discontinuous conduction mode (DCM) to maintain a constant input impedance through a fixed duty cycle for each of the transducers, and the usage of pulse voltage that connected to the gate MOSFET of both sources with the idea of integrating the two inputs from the transducers with a supercapacitor to store the output voltage of the energy harvester. The circuit rectifies the AC output from the hybrid energy harvester and produces a regulated DC output that is sufficient to power up the IoT device, an example in this project, NRF204L01, a single chip transceiver. The circuit is designed and simulated with Multisim to get an output voltage which is between 1.9 V to 3.6 V. The simulation result shows the output voltage generated by the circuit is 1.011 V with frequency of 100 Hz and 20 Hz for piezoelectric and electrostatic respectively. The experiment result shows the output voltage generated by the circuit is 400 mV which is lower compared to the simulation. Detailed analysis about the circuit is also discussed in this report.
format Final Year Project
author Roslee, Muhamad Faris Izzuddin
spellingShingle Roslee, Muhamad Faris Izzuddin
Development of Power Management Circuit for Hybrid Energy Harvester
author_facet Roslee, Muhamad Faris Izzuddin
author_sort Roslee, Muhamad Faris Izzuddin
title Development of Power Management Circuit for Hybrid Energy Harvester
title_short Development of Power Management Circuit for Hybrid Energy Harvester
title_full Development of Power Management Circuit for Hybrid Energy Harvester
title_fullStr Development of Power Management Circuit for Hybrid Energy Harvester
title_full_unstemmed Development of Power Management Circuit for Hybrid Energy Harvester
title_sort development of power management circuit for hybrid energy harvester
publishDate 2017
url http://utpedia.utp.edu.my/19086/1/5.%20Dissertation.pdf
http://utpedia.utp.edu.my/19086/
_version_ 1739832586208804864
score 13.251813

相似書籍